Stretch-flangeability measures the ability of a material to form into a complex shape. The parameter is often related to simple properties derived from tensile tests. An attempt is made here to discover the best way to exploit tensile test data to indicate flangeabilty. It is found that the ultimate tensile strength of steel is the single most important criterion that correlates with stretch-fl...

A bulk nanocrystalline Co–P alloy was subjected to tensile tests. Grain growth from approximately 12 nm in the as-deposited state to about 25 nm after the tensile test was observed. Grain growth was not observed when the deforming volume was increased, or when the specimen was annealed at 433 K or above prior to the tensile tests. 2006 Acta Materialia Inc. Published by Elsevier Ltd. All rights ...

We employ periodic density functional theory to explore the effect of cyclic tensile loading on the behavior of alumina in the threshold region of crack formation. We find evidence for nanoscale fatigue when the alumina lattice is subjected to uniaxial tensile loading and unloading and tensile stresses normal to the applied load. It is possible that such atomic-scale fatigue impacts the durabil...

The tensile fatigue properties of the collagen fibre meshwork in normal human articular cartilage were measured by subjecting isolated specimens of post-mortem femoral head cartilage to cyclic tensile stress. The results of the study showed (1) that the collagen fibre meshwork is fatigue prone and (2) that its fatigue strength decreases rapidly with age. Extrapolation of the data to physiologic...

Tensile strength is one of the important strength parameters of concrete. Indirect methods have been used up till now for its measurement. These methods though widely accepted, do not furnish the true tensile strength of concrete. This paper presents a new approach for the experimental determination of true tensile strength of concrete. Results obtained by this test are quite encouraging and sh...

Surface treatment of silica fume with sulfuric acid prior to incorporation in a cement matrix resulted in composites exhibiting increases in tensile strength by 12%, tensile modulus by 72%, tensile ductility by 57%, abrasion resistance by 20%, loss tangent by 30–80%, flexural storage modulus by 80–120%, and flexural loss modulus by 160–300%, relative to the values obtained by using as-received ...

The penetration coefficients (PC) and tensile bond strengths of two pit and fissure sealants and a low viscosity bonding resin were evaluated. The penetration coeftYcients of the resin systems were determined at 22°C. Five determinations were done with each resin. Bonded test specimens were loaded to failure in the tensile mode in an Instron testing macl~’ne. Ten specimens were prepared with ea...

We constructed an atomic structure model for a PANbased carbon fiber containing amorphous structures using molecular dynamics methods. It was found that basic physical properties such as crystallinity, Young’s modulus, and thermal conductivity of our model were nearly identical to those of real carbon fibers. We then obtained the tensile strength of a carbon fiber, which has no macro defects. W...

This article presents 755 groups splitting tensile strength tests data of concrete with manufactured sand (MSC) in different curing age ranged from 1 day to 388 days related to the research article "Experimental study on tensile strength development of concrete with manufactured sand" (Zhao et al., 2017) [1]. These data were used to evaluate the precision of the prediction formulas of tensile s...

Tensile strain is crucial to expect the direct recombination in germanium (Ge), towards monolithic light sources on silicon (Si). Freestanding beams of Ge are known to produce strong tensile strain, however, it is not trivial to construct a cavity in a freestanding structure. Here, we fabricated Ge micro-disks on freestanding oxide beams, and observed Whispering-Gallery-Modes (WGM) by photolumi...