Blends of nylon-6 with polybutadiene were prepared with comparable morphology and different molecular weights of the matrix. These specimens were tested using the notched Izod impact test and the notched tensile impact test. An increase in molecular weight resulted in a shift of the brittle-to-tough transition temperature of 40°C to lower temperatures. In the notched tensile impact tests, espec...

The stress on a test specimen during tensile testing is generally measured by a strain gauge. This method has some problems in that it would influence the measurement conditions of the tensile test and can evaluate only the position at which the strain gauge is attached. The acoustoelastic method is proposed as a method replacing the strain gauge method. However, an ultrasonic sensor with a pie...

Linear Low Density Polyethylene-Natural Rubber (LLDPE-NR) composites in the ratio of 70:20 were made with different loadings of nanosilica and micro-scale Palm Oil Fuel Ash (POFA). Linear Low Density Polyethylene grafted with maleic anhydride (LLDPE-g-MAH) of 10 wt% was added as a compatibiliser. The composites were produced by using two-roll mill machine. The tensile properties of the composit...

This paper presents the multivariate linear models for the evaluation of compressive, flexural and splitting tensile strengths, and toughness ratio of high-performance steel fiber reinforced concrete (HPSFRC). In this study, 44 series of concrete mixes with varying silica fume replacement and fiber dosage (Vf = 0.0, 0.5, 1.0 and 1.5%) were considered. Test results indicated that addition of fib...

This paper in essence presents comparative experimental data on the mechanical performance of steel and synthetic fibre-reinforced concrete under compression, tensile split and flexure. URW1050 steel fibre and HPP45 synthetic fibre, both with the same concrete design mix, have been used to make cube specimens for a compression test, cylinders for a tensile split test and beam specimens for a fl...

The hydraulic bulge test (HBT) method is proposed to determine material tensile strengths. The basic idea of HBT is similar to the small punch test (SPT), but inspired by the manufacturing process of rupture discs-high-pressure hydraulic oil is used instead of punch to cause specimen deformation. Compared with SPT method, the HBT method can avoid some of influence factors, such as punch dimensi...

BACKGROUND AND AIMS In order to fabricate prostheses with high accuracy and durability, soldering techniques have been introduced to clinical dentistry. However, these prostheses always fail at their solder joints. The purpose of this study was to evaluate the effect of gap distance on the tensile strength of base metal solder joints. MATERIALS AND METHODS Based on ADA/ISO 9693 specifications...

In the present study we have attempted to verify a theoretical model of grab versus strip strengths of fabrics [Textile Research Journal, 2003, 73(2), 165–171] through experimental investigation. Five different fabrics were included in this study, and three related parameters were investigated including the modulus ratio of the specimen (shear versus tensile moduli), the specimen gauge length a...

background and aims. in order to fabricate prostheses with high accuracy and durability, soldering techniques have been introduced to clinical dentistry. however, these prostheses always fail at their solder joints. the purpose of this study was to evaluate the effect of gap distance on the tensile strength of base metal solder joints. materials and methods. based on ada/iso 9693 specifications...