Cracks free mullite-alumina Functionally Gradient Ceramics (FGC) have been obtained by sequential slip casting of Mullite-alumina slurries with diserent mullite/alumina ratios. These slurries were prepared with 65 % solids content and viscosities rangingpom 10 to 40 mPa.s. 7he presence of cracks perpendicular to the FGC layers have been attributed to residual stresses developed because of the m...

In the electronics industry epoxy molding compounds, underfills and adhesives are used for the packaging of electronic components. These materials are applied in liquid form, cured at elevated temperatures and then cooled down to room temperature. During these processing steps residual stresses are built up resulting from both cure and thermal shrinkage. In order to minimize these stresses inor...

welding is one of the most important assembling methods which are widely applied in different applications. in service conditions, some of the weld joints which meet defects must be repaired. the residual stresses impress the operation and efficiency of the repair weldment. in this study, the temperature and the residual stress fields were investigated by both the finite element simulation and ...

Hot forging is a common manufacturing process for the production of large quantities of engineering components. Residual stresses are developed in forged components as a result of various aspects of the manufacturing process, including subsequent cooling, and heat treatment. Residual stresses can significantly affect the deformation and fatigue failure of materials. Hot forged EN15R steel bars ...

The conventional elastic analysis of thick walled cylinders to final radial & hoop stresses is applicable for the internal pressures up to yield strength of material. The stress is directly proportional to strain up to yield point Beyond elastic point, particularly in thick walled cylinders. The operating pressures are reduced or the material properties are strengthened. There is no such existi...

final step of rail manufacturing is cold rolling straightening process and it hassignificant effects on mechanical properties, straightness, flatness and development of residualstresses. measurement of residual stresses after straightening process is obligated by railmanufacturing standards. in the present investigation, an attempt has been made to evaluateresidual stresses after straightening ...

Residual stresses have become an important player in the field of the structural integrity for many years. Having an exact knowledge of residual stress distributions can be essential in designing the engineering components as unexpected failures are inevitable where such stresses are ignored.  There are many residual stresses measurement techniques including destructive and non-destructive ones...

Nonlinear ultrasonic waves in solids have shown good sensitivity to quasi-static stresses. The stress sensitivity of elastic waves is typically associated to finite strains (e.g. theory of acoustoelasticity). In the case of waveguides, classical nonlinear theories for guided waves are still based on the assumption of finite strains. In the case of constrained solids subjected to thermal excursi...

1. ABSTRACT X-ray diffraction (XRD) measurements have been made to determine residual stresses in embedded Al particles placed between the first and second ply of both unidirectional and fabric graphite/PMR-15 composite specimens. In order to further verify the results obtained, the effect of externally applied four-point bending on the measured strains and stresses in the Al inclusions was inv...