The multilayer antimony-doped tin dioxide coating was obtained by cathodic deposition of multilayer metal-hydroxide coating with near 100-nm thickness layers on the alloy underlayer accompanied by the anodic oxidation of this coating. The potential regions of deposition of tin, antimony, tin-antimony alloy, and mixture of this metals and their hydroxides in the pyrophosphate-tartrate electrolyt...

To resist wear, biomedical components require coatings that are exceptionally hard, have low friction, and are bioinert. Diamond-like carbon has been shown to provide this capability and to prevent leaching of metallic ions into the body. There are many ways to deposit such coatings from carbonaceous precursors, and some offer the means to incorporate other elements such as nitrogen, titanium, ...

Mechanically robust photocatalytic titanium oxide coatings can be deposited using reactive magnetron sputtering. In this article, we investigate the effect of doping on the activity of reactively sputtered TiO2. Silver, copper and stainless steel targets were used to co-deposit the dopants. The films were characterised using XRD, SEM and EDX. Adhesion and mechanical properties were evaluated us...

Electrocrystallization of hydroxyapatite (HAp) on titanium was achieved by cathodic polarization in solution containing calcium nitrate and ammonium dihydrogen phosphate. The composition and pH of the bath were found to significantly affect the nature and surface morphology of the deposit. The effect of bath temperature was also studied. X-ray diffraction tests and microscopic inspections confi...

The study of effect of laser scanning speed on material efficiency in Ti6Al4V application is very important because unspent powder is not reusable because of high temperature oxygen pick-up and contamination. This study carried out an extensive study on the effect of scanning speed on material efficiency by varying the speed between 0.01 to 0.1m/sec. The samples are wire brushed and cleaned wit...

The active cooling of the Supersonic Combustion Ramjet engine, for hypersonic flight purpose, is ensured thanks to fuel, n-dodecane for the present study. The endothermic fuel pyrolysis, starting above 800 K, could generate an unwanted coke formation. Experimental tests up to 1125 K and between 1 MPa and 6 MPa have been performed on the hydrocarbon fuel pyrolysis to evaluate the coking activity...

With incredible hardness and excellent wear-resistance, nanocrystalline diamond (NCD) coatings are gaining interest in the biomedical community as articulating surfaces of structural implant devices. The focus of this study was to deposit multilayered diamond coatings of alternating NCD and microcrystalline diamond (MCD) layers on Ti-6Al-4V alloy surfaces using microwave plasma chemical vapor d...

Metalorganic chemical vapor deposition (MOCVD) was used to deposit epitaxial BaTiO 3 thin films on (100) MgO substrates at 600'C. The metalorganic precursors employed in the deposition experiments were hydrated Ba(thd)2 (thd = CIIH190 2) and titanium isopropoxide. The films were analyzed by means of transmittance spectroscopy, wavelength dispersive x-ray spectrometry, secondary ion mass spectro...

Near-net shape processes, such as laser metal deposition (LMD), offer a unique combination of process flexibility, time savings, and reduced cost in producing titanium alloy components. The current challenge in processing titanium alloys using LMD methods is understanding the complex microstructural evolution as a part is fabricated layer by layer. The microstructure is affected by the repeated...