From a design and hydraulic standpoint, trays are relatively complex distillation internals. In the ongoing search for higher performance trays, one first must understand the hydraulic and mass transfer aspects of the tray operation such as entrainment, downcomer flooding, and vapor liquid contact. When this is well understood, then various aspects of the deck and/or downcomer designs can more ...

INTRODUCTION A computer model quantified and compared muscle lengths and moment arms of two different reverse shoulder arthroplasty humeral tray designs during two different motions. METHODS The computer model simulated internal/ external rotation and abduction in the scapular plane for the normal shoulder, the 38 mm non-offset, and the 38 mm posterior-superior offset reverse shoulders. Muscl...

In this paper, tuned mass dampers with optimal parameters for long span transmission tower-line system are investigated. Equations of motion for a structure-TMD system are derived, and the parameters of TMD, stiffness and damping are optimized, respectively. According to a real project, three-dimensional finite element models of both transmission tower and transmission tower-line system are cre...

A study was conducted to find out the optimum tray load and drier type for the drying of osmosed mango, guava slices and aonla segments. The osmosed slices and segments were dehydrated in a cabinet drier, low temperature drier and vacuum drier with the tray loads of 0.30, 0.35, 0.40 and 0.45 g/cm. On the basis of, correlation and regression analyses performed by using dehydration time (h), drie...

This work presents the simulation of a steam generator or water-tube boiler through implementation in MATLAB® for proposed mathematical model. Mass and energy balances three main components boiler—the drum, riser down-comer tubes—are presented. Three alternative solutions to ordinary differential equation (ODE) were studied, based on Runge–Kutta 4th order method, Heun’s MATLAB function Ode45. T...

conclusions the results of this study led to the identification of many of the errors and conditions that affect the performance of controllers, providing the ability to define safety and ergonomic interventions to reduce the risk of human error. therefore, the results of this study can be a basis for planning atm to prioritize prevention programs and safety enhancement results the analysis of ...

Introduction also be used for multiple restorations! or fixed partial dentures up to four units. However, if the most posterior tooth in the arch is prepared for a fixed partial denture, the patient may close at a decreased vertical dimension of occlusion, which would result in a significant negative occlusal error. Care must be excercised when this type of impression tray is used. Before the i...