The potential of carbon nanotubes (CNT) supported cobalt catalysts for Fischer-Tropsch (FT) reaction is shown. Using the wet impregnation method cobalt on carbon nanotubes catalysts were prepared with cobalt loading varying from 15 to 45 wt. %. The catalysts are characterized by different methods including: BET physisorption, X-ray diffraction, hydrogen chemisorption, and temperature-progra...

Multiplicity of steady states was experimentally obser®ed, somewhat sporadically, for ( ) Fischer Tropsch FT synthesis in stirred tank slurry reactors in the reactor originally ( ) at the wax-producing normal steady state suddenly jumping to a high-temperature ( ) methane-producing steady state for some time and e®entually returning to the normal steady state. A diagnostic nonlinear analysis sh...

Most chemical reactions occur over multiple steps whose identity is elucidated by experiment, yielding a reaction mechanism. Knowledge of cognitive science suggests that mechanism elucidation can be viewed as a knowledge-guided search within a combinatorial space. The MECHEM computer program searches this space comprehensively for the simplest plausible mechanisms. We use MECHEM to find mechani...

Fischer-Tropsch synthesis is a part of Gas-to Liquids (GTL), Biomass-to-Liquids (BTL) and Coal to Liquids (CTL) technologies, which produce alternatives clean fuels from natural gas, biomass and coal. The catalytic performance of cobalt catalysts in Fischer-Tropsch synthesis strongly depends on the size of cobalt particles in nanoscale range (6-30 nm). Cobalt catalysts are usually prepared via ...

the effects of confinement in carbon nanotubes on fischer-tropsch (ft) activity, selectivity and lifetime of carbon nanotubes (cnts) supported iron catalysts are reported. a method was developed to control the position of the catalytic sites on either inner or outer surface of carbon nanotubes. tem analyses revealed that more than 80% of iron oxide particles can be controlled to be positioned a...

The metallic Co catalyst for the Fischer-Tropsch reaction is prepared by reduction of Co salts impregnating microporous silica. The average size of the metallic Co clusters is determined from the average number of neighbours deduced from Co K-edge EXAFS of catalyst samples. A model EXAFS signal constructed from the scattering paths of Co metal fcc lattice with lengths up to 5 A is calibrated on...

The aviation industry contributes to more than 2% of global human-induced CO2-emissions, and it is expected increase 3% by 2050 as demand for grows. As the still dependent on conventional jet fuel, an essential component a carbon-neutral growth low-carbon, sustainable fuels, example alternative drop-in fuels with biobased components. An optimization model was developed case Sweden examine impac...

in this paper, modeling and optimization of fischer-tropsch synthesis is considered in a fixed-bed catalytic reactor using an industrial fe-cu-k catalyst. a one dimensional pseudo-homogenous plug flow model without axial dispersion is developed for converting syngas to heavy hydrocarbons. the effects of temperature, pressure, h2 to co ratio in feed stream, and co molar flow on the mass flow rat...

Nano-sized iron-based catalyst was prepared by the micro-emulsion method. The composition of the final nano-sized iron catalyst, in term of the atomic ratio contains: 100Fe/4Cu/2Ce. Experimental techniques of XRD, BET, TEM and TPR were used to study the phase, structure and morphology of the catalyst. Fischer-Tropsch Synthesis (FTS) reaction test was performed in a fixed bed reactor at pressure...