This paper reports on the results of experimental investigations on the performance of a jet pump operated under selected primary flows to optimize the related parameters. For this purpose a two-phase flow jet pump was used employing various profiles of nozzles as the primary device which was designed, fabricated and used along with the combination of mixing tube and diffuser. The profiles empl...

A diagnostic technique capable of characterizing interfaces between transparent, immiscible fluids is developed and demonstrated by investigating the morphology of liquid-gas interfaces in an adiabatic two-phase flow through a microchannel of 500 μm × 500 μm square cross section. Water seeded with 0.5 μm-diameter fluorescent polystyrene particles is pumped through the channel, and the desired a...

This paper reports the results of an experimental study conducted to characterise the gas-liquid multiphase flows experienced within a vertical riser transporting a range of gas-liquid flow rates. The scale experiments were performed using an air/silicone oil mixture within a 6 m long riser. The superficial air velocities studied ranged from 0.047 to 2.836 m/ s, whilst maintaining a liquid supe...

A diagnostic technique capable of characterizing interfaces between transparent, immiscible fluids is developed and demonstrated by investigating the morphology of liquid–gas interfaces in an adiabatic two-phase flow through a microchannel of 500 lm 500 lm square cross section. Water seeded with 0.5 lm-diameter fluorescent polystyrene particles is pumped through the channel, and the desired adi...

In this tutorial the fundamentals of non-boiling heat transfer in two-phase twocomponent gas-liquid flow in pipes are presented. The techniques used for the determination of the different gas-liquid flow patterns (flow regimes) in vertical, horizontal, and inclined pipes are reviewed. The validity and limitations of the numerous heat transfer correlations that have been published in the literat...

We consider the system of equations governing an incompressible immiscible two-phase flow within an heterogeneous porous medium made of two different rock types. Since the capillary pressure function depends on the rock type, the capillary pressure field might be discontinuous at the interface between the rocks. We introduce multivalued phase pressures to give a sense to the transmission condit...

The current understanding of droplet generation processes from liquid films is reviewed. Films are defined as liquids with one free and one wall-bound surface. In many of the systems where films occur atomization is an undesirable side-effect of the two-phase flow. The motivation for this study, however, is a process where atomization from the film is the goal—a gas-centered swirl coaxial rocke...

In this work, we develop a self-consistent physical model of bubbles in a gas solid two-phase 1 flow. Using the Peng-Robonson state equation and a detailed specific heat ratio equation of bubbles, 2 we obtain the kinetic equations of the bubbles on the basis of the Ergun equation, thermodynamic 3 equations, and kinetic equations. It is found that the specific heat ratio of bubbles in such syste...

Article history: Received 18 September 2013 Received in revised form 19 January 2014 Accepted 13 February 2014 Available online 22 February 2014

Although field observations of sudden spillway releases highlighted strong aeration of dam break wave flows, no study investigated these two-phase flow characteristics. New original experiments were conducted down a 24 m long stepped waterways. Dam break wave propagation showed an equivalent flow resistance similar to steady flow conditions (f ~ 0.05). Detailed unsteady air-water flow measureme...