Two compositions of ZrB2-based ceramic composites containing Si3N4, Al2O3 and Y2O3 have been hot-pressed at different temperatures between 1673 and 1773 K for 60 min in vacuum. The densification behavior of the composites was examined during the sintering process. The microstructures of the composites were characterized by scanning electron microscopy, and the crystalline phases were identified...

in recent years the aluminum matrix composites are gaining wide spread applications in automotive, aerospace, defense, sport and other industries. the reason for this is their exciting properties like high specific strength, stiffness, hardness, wear resistance, dimensional stability and designer flexibility. the present work reports on mechanical properties and microstructure analysis of al-si...

WC/Y–TZP–Al2O3 hybrid ceramic–matrix composites (CMCs) with dispersed Hadfield steel particles were sintered and then tested at sliding speeds in the range of 7–37 m/s contact pressure 5 MPa. Fast low-temperature sinter-forging allowed obtaining micron-sized WC grains, submicron-sized alumina-reinforced yttria partially stabilized polycrystalline tetragonal zirconia (Y–TZP–Al2O3), evenly distri...

We report on the residual stresses in amorphous shape memory polymers reinforced with SiC particles. After 50% compression of the composite material at 25 °C, the SiC particles exhibit a compressive stress, which is almost completely released during heated recovery at 120 °C. The residual stresses in SiC hexagonal (6H) phase were estimated through the average change of the unit-cell volume. Lat...

In this paper, comparisons of damage evolution between 2D C/SiC and SiC/SiC ceramic-matrix composites (CMCs) under tension-tension cyclic fatigue loading at room and elevated temperatures have been investigated. Fatigue hysteresis loops models considering multiple matrix cracking modes in 2D CMCs have been developed based on the damage mechanism of fiber sliding relative to the matrix in the in...

Thermal shock property of the material can be improved by improving fracture property of the material. In this paper, factors affecting fracture property have been studied and the effect of residual stress, microstructure, strain rate and stress concentration on fracture property of material has been analyzed, which may provide help for improving thermal shock property of material. Thermal shoc...

In this investigation, special consideration was given to observe the influence of the acquired ultra-fine-grain (UFG) structure through friction stir processing (FSP) on mechanical and damping properties. As the mechanical behaviour of the composites are intensely related to their microstructure. For deeply understanding the possible mechanism and detailed microstructural observations at a lon...

Ceramic matrix composites (CMCs) is one of the most promising candidates for high temperature structural material, in which SiC matrix exhibits an excellent oxidation resistance because of the formation of a protective layer of silica which limits further oxidation [1]. CMCs with continuous fibers exhibit attractive properties such as low densities, high elastic moduli, and high strengths at el...

Magnesium based metal matrix composites (MMCs) have been extensively studied as an attractive choice for automotive and aerospace applications due to their low density and superior specific properties including strength, stiffness and creep resistance. Xi et al [1] studied the Ti6Al-4V particulate (TAp) reinforced magnesium matrix composite which is fabricated by powder metallurgy route. The te...