Y2O3/Y2O2S:Eu3+ nanocomposites were successfully prepared by reducing Y2O3:Eu3+ nanocrystals. The obtained Y2O3/Y2O2S:Eu3+ nanocomposites not only can emit enhanced red luminescence excited at 338 nm, but also can be used to improve the efficiency of the dye sensitized solar cells, resulting an efficiency of 8.38%, which is a noticeable enhancement of 12% compared to the cell without Y2O3/Y2O2S...

We report the epitaxial growth and superconducting properties of Y2O3-added YBa2Cu3Ox (YBCO) films grown on SrTiO3-buffered MgO substrates by pulsed-laser deposition using surface-modified YBCO targets. Areas of Y2O3 sectors on the YBCO target were increased to 5.44% and 9.22% of the total YBCO pellet in order to find a correlation between the Y2O3 content, morphology, and the pinning propertie...

Oxide dispersion strengthened (ODS) steels are promising candidates for applications in fusion and fission rectors. Y2O3 particles dispersed in an iron matrix drastically improve the strength without adverse effects on ductility. We investigate here details of the dislocation core structure in Y2O3 precipitates, and at the interface between the iron matrix and the Y2O3 precipitate. We also simu...

The objective of this study was to improve the oxidation resistance of electroplated Ni-Cr coatings by introducing a fine dispersion of yttria (Y2O3) nanoparticles to the coatings. A technique was developed to produce Y2O3 nanoparticles nm in size. Electroplating conditions were also investigated and it was found that pulse plating could produce high quality coatings without cracking. The Y2O3 ...

The flux pinning effects of Y2O3 nanoparticulate inclusions in YBa2Cu3O7 d (Y123 or YBCO) thin films using (Y2O3/Y123) · N multilayer structures were studied. The multilayer films were made with pulsed laser deposition (PLD) on SrTiO3 and LaAlO3 substrates with a Y2O3 nanoparticulate pseudo-layer thickness ranging from 0.2 to 1.4 nm, and YBCO layer thickness varying from 7 to 50 nm. Scanning el...

The formation of superconducting YBa2Cu3O7−x (Y123) by in situ pulsed laser deposition from a stoichiometric Y123 target typically requires an oxygen-ambient environment (P ∼ 100–300-mtorr O2) and appropriate substrate temperature during deposition. We have found that pulsed laser deposition from a Y123 target in vacuo onto a (001) LaAlO3 substrate favors the formation of Y2O3. We observed that...

The microstructure evolution and interface characteristics of a directionally solidified Ti-43Al-3Si (at.%) alloy in an alumina (Al2O3) crucible with new Y2O3 skull-aided technology were investigated. The Y2O3-skull that is in contact with the TiAl-melt is relatively stable, which results in a more controlled reaction between the skull and the melt than in the case of an Al2O3 crucible is used....

Nanocrystalline yttrium oxide (Y2O3) thin films were made by sputter deposition onto silicon (100) substrates keeping the deposition temperature fixed at 300 °C. The surface/interface chemistry, Y−O bonding, and optical constants of the Y2O3 film surface and Y2O3−Si interface were evaluated by the combined use of X-ray photoelectron spectroscopy (XPS), depth-profiling, and spectroscopic ellipso...