Fe3Al intermetallics (Fe3Al, Fe3Al-Zr, Fe3Al-Zr,Mo and Fe3Al-Zr,Mo,Nb) were oxidized at 950 C in dry and humid (11 vol% water) synthetic air. Thermogravimetric measurements showed that the oxidation rates of the tested intermetallics were lower in humid air than in dry air (especially for Fe3Al-Zr,Mo and Fe3Al-Zr,Mo,Nb). The addition of small amounts of Zr, Mo or Nb improved the kinetics compar...

Fe3Al intermetallics (Fe3Al, Fe3Al-Zr, Fe3Al-Zr,Mo and Fe3Al-Zr, Mo, Nb) were oxidized at 950 °C in dry and humid (11 vol% water) synthetic air. Thermogravimetric measurements showed that the oxidation rates of the tested intermetallics were lower in humid air than in dry air (especially for Fe3Al-Zr, Mo and Fe3Al-Zr, Mo, Nb). The addition of small amounts of Zr, Mo or Nb improved the kinetics ...

Corrosion-resistant coatings based on the iron aluminide intermetallic compound Fe3Al are currently being investigated for fossil energy applications. Fe3Al possesses excellent intrinsic high-temperature oxidation and sulfidation resistance, and a significant effort has been made in the development of bulk alloys based on it. While substantial progress has been made, the widespread use of these...

A multi-year effort has been focused on optimizing the long-term oxidation performance of ingot-processed (IP) and oxide-dispersion strengthened (ODS) Fe3Al and iron aluminidebased coatings. Based on results from several composition iterations, a Hf-doped alloy (Fe28Al-2Cr-0.05at.%Hf) has been developed with significantly better high temperature oxidation resistance than other iron aluminides. ...

The Fe3Al alloy with D03 structure exhibits large recoverable strains due to reversible slips. Tension and compression experiments were conducted on single crystals of Fe3Al, and the onset of slip in forward and reverse directions were obtained utilizing high-resolution digital image correlation technique. The back stress provides the driving force for reversal of deformation upon unloading, re...

The synthesis of nanocrystalline Fe3Al powder by mechanical alloying as well as the structural ordering of the synthesized Fe3Al particles during the subsequent thermal analysis were investigated. Mechanical alloying was performed up to 100 hours using a planetary ball mill apparatus with rotational speed of 300 rpm under argon atmosphere at ambient temperature. The synthesized powders were cha...

Article history: Received: 28.11.2012. Received in revised form: 04.01.2013. Accepted: 15.01.2013. The microstructural evolution of the coexistence of spinodal decomposition and ordering is characterized by metallographic microscopy and transmission electron microscopy in aged Fe-23Al (i.e. Fe-23at%Al) alloy. This paper discusses a phase transition mechanism of the microstructure evolution. The...

A carbon tool steel plate was coated with an aluminum foil a thickness of 100 μm by explosive welding. This aluminum-coated heat-treated in the temperature range 973−1273 K for up to 3.6 ks atmosphere form Fe-Al alloy layer on surface. The basically composed Fe2Al5, two kinds FeAl (Al-rich and Fe-rich FeAl), Fe3Al containing (Fe3Al(C)) ferrite stabilized diffusion (α-Fe(Al)). FeAl2 also detecte...

This work evaluates the suitability of iron aluminide coatings for use in high temperature fossil fuel combustion environments, such as boiler applications. The coatings are applied using High Velocity Oxy-Fuel (HVOF) thermal spray techniques. Bulk Fe3Al coatings are known to exhibit excellent oxidation and sulfidation resistance at high temperatures, however, the behavior of HVOF-deposited Fe3...

the synthesis of nanocrystalline fe3al powder by mechanical alloying as well as the structural ordering of the synthesized fe3al particles during the subsequent thermal analysis were investigated. mechanical alloying was performed up to 100 hours using a planetary ball mill apparatus with rotational speed of 300 rpm under argon atmosphere at ambient temperature. the synthesized powders were cha...