نتایج جستجو برای: ANOVA D3 tool steel Grey relational analysis Multi

تعداد نتایج: 3569669  

Anand S. Shivade Vasudev D. Shinde

In this paper, wire electrical discharge machining of D3 tool steel is studied. Influence of pulse-on time, pulse-off time, peak current and wire speed are investigated for MRR, dimensional deviation, gap current and machining time, during intricate machining of D3 tool steel. Taguchi method is used for single characteristics optimization and to optimize all four process parameters simultaneous...

Journal: :journal of computational & applied research in mechanical engineering (jcarme) 2014
s. khalilpourazary p. m. kashtiban n. payam

nowadays, in order to reach minimum production cost in machining operations, various optimization methods have been proposed. since turning operation has different parameters affecting the workpiece quality, it was selected as a complicated manufacturing method in this paper. to reach sufficient quality, all influencing parameters such as cutting speed, federate, depth of cut and tool rake angl...

2016
D. Rajasekhar Reddy Hari Babu

Machining can be outlined as the process of taking away material from a work piece in the grade of chips. During a machining process, isolated of the energy is turned into heat energy through the detritions yielded between the tool and the work piece and the plastic deformation of the work material in the machining zone. Turning is charmed by several constituents, for example, the cutting speed...

N. Payam P. M. Kashtiban S. Khalilpourazary

Nowadays, in order to reach minimum production cost in machining operations, various optimization methods have been proposed. Since turning operation has different parameters affecting the workpiece quality, it was selected as a complicated manufacturing method in this paper. To reach sufficient quality, all influencing parameters such as cutting speed, federate, depth of cut and tool rake angl...

2014
P. Madhava Reddy P. Vijaya Bhaskara Reddy Y. Ashok Kumar Reddy

This paper presents the optimization of CNC turning parameters for EN 16 steel bar using the Grey Taguchi Method. A plan of experiments based on Taguchi’s L27 orthogonal array was established and turning experiments were conducted with prefixed cutting parameters for EN 16 steel bar using tungsten carbide tool. The turning parameters are cutting speed, feed rate and depth of cut and the respons...

Journal: :IJMMME 2014
Purna Chandra Mishra Dipti Kanta Das Susant Kumar Sahu

This study investigates the effects of cutting parameters on surface roughness (Raμm ), cutting temperature (T0C) at the chip tool interface and the material removal rate (MRR mm3/min) during hard machining of AISI 1015 (43 HRC) steel using carbide insert under dry and spray impingement cooling environment. A combined technique using orthogonal array and analysis of variance (ANOVA) was employe...

2003
P. S. Kao H. Hocheng

Grey relational analysis is useful for the multi-input, discrete data and uncertain experimental study. Developed in this paper is the application of the grey relational analysis for optimizing the electropolishing of 316L stainless steel with multiple performance characteristics. The processing parameters (temperature, current density, and electrolyte composition) are optimized with considerat...

Journal: :World Journal of Advanced Engineering Technology and Sciences 2023

This study investigated the multi-optimization of turning process on AISI1045 steel material with CNMG cutting tool for an optimal parametric combination to yield minimum surfaces roughness maximum MRR using a Grey relational analysis (GRA) and Taguchi method. In view fact, that traditional method can’t solve multi-objective optimization problem: To overcome this limitations relation theory has...

2014
Abhishek Dubey Devendra Pathak Nilesh Chandra Rahul Davis

This paper presents the multiple response optimization of end milling parameter using grey based taguchi method. Experiments were designed and conducted based on L27 orthogonal array design The milling parameter were spindle speed, depth of cut, feed rate and pressurized coolant jet and the response was surface roughness. EN31, high carbon alloy steel which achieves a high degree of hardness an...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید