a good understanding of adsorption equilibrium and thermodynamics is required to design and operate an adsorption process. this study was conducted to assess the adsorption percentage of pb2+ ions as a function of contact time, solution ph and temperatures, and adsorbent dosage through a series of batch experiments. the methods including zeta potentials, specific surface area measurements and t...

the objective of this study was to assess the adsorption potential of activated carbon (ac) asan adsorbent for the removal of murexide (mu) from aqueous solutions. the influence of variablesparameters including ph, amount of adsorbent, sieve size of adsorbent, temperature and contact timeon mu removal was studied. following optimization of variables, the relation between concentrations ofdye re...

conclusions the study results showed that by increasing the initial dye concentration and contact time, the adsorption capacity increased, as well. moreover, the thermodynamic parameters (δh °, δg °, and δs °) revealed the endothermic sorption of rr-198 onto mwcnts. results the rr-198 absorption rates were 33.26 and 222.88 mg/g, respectively for 20, and 200 mg/l dye concentration, at ph of 3, 6...

a type of novel hypercross-linked fiber adsorbent was obtained by sulfonation and cross-linking reaction of polypropylene fiber grafted styrene-divinylbenzene. the aim of the fiber sulfonation and cross-linking method was to prepare rigid three dimensional networks in the entire fiber and change the ion exchange capacity of fiber. the hypercross-linked fiber adsorbent possesses a principally di...

a type of novel hypercross-linked fiber adsorbent was obtained by sulfonation and cross-linking reaction of polypropylene fiber grafted styrene-divinylbenzene. the aim of the fiber sulfonation and cross-linking method was to prepare rigid three dimensional networks in the entire fiber and change the ion exchange capacity of fiber. the hypercross-linked fiber adsorbent possesses a principally di...

isotherm equation is one of the important scientific bases for adsorbent selection. there are different isotherms that do not account for an adsorbate, different chemisorption geometries on the nanoporous surface. it is interesting to introduce a general isotherm, which considers different chemisorption geometries of an adsorbate on nanoporous surfaces. in this study, an isotherm for non-dissoci...

the adsorption thermodynamic characteristic of cu2+ from aqueous solution onto humin andalso humic acid from a typical black soil in northeast china were examined at three different temperatures(298, 318 and 338 k) by batch isotherm experiments. results showed that humin was structurally differentfrom humic acid. the increase of temperature had a positive effect on the adsorption process. freun...

Isotherm equation is one of the important scientific bases for adsorbent selection. There are different isotherms that do not account for an adsorbate, different chemisorption geometries on the nanoporous surface. It is interesting to introduce a general isotherm, which considers different chemisorption geometries of an adsorbate on nanoporous surfaces. In this study, an isotherm for non-dissoci...

a batch adsorption study was applied to investigate the adsorption of pb2+ ions from aqueous solutionby nanographene (ng).the adsorption percentage of pb2+ions onto ng samples at different initial ph,contact time (tc), adsorbent dosage (mng) and temperature (t) were investigated. the results showedthat ng is an excellent adsorbent for pb2+ions removal from aqueous solutions with an adsorptionpe...

to observe the feasibility of the removal of carmine, peanut husk, an agriculture by-product, was crosslinked with epichlorohydrin in alkaline medium and used for adsorption of carmine from aqueous solution. batch experiments were carried out to study the effects of various parameters such as initial ph, contact time, adsorbent dosage and initial carmine concentration, as well as temperature on...