نتایج جستجو برای: Al 6061

تعداد نتایج: 443867  

2002

The material flow and microstructural evolution in the friction stir welds of a 6061-Al alloy to itself and of a 6061-Al alloy to 2024-Al alloy plates of 12.7 mm in thickness were studied under different welding conditions. The results showed that plastic deformation, flow, and mechanical mixing of the material exhibit distinct asymmetry characteristics at both sides of the same and dissimilar ...

2017
Mohsan Jelani Zewen Li Zhonghua Shen Maryam Sardar

The failure response of aluminum alloys (Al-6061 and Al-7075) under the condition of simultaneously pre-stressing and laser heating was investigated. Specimens were subjected to predetermined preloading states and then irradiated by continuous wave fiber (Yb) laser. For all specimens, it was found that the yield stress decreased with increasing laser power density. This implies that the load-be...

Journal: :journal of modern processes in manufacturing and production 2015
hamzeh shahrajabian masoud farahnakian seyed alireza mousavi hasan soltani

in magnetic abrasive finishing (maf), abrasive grains as a tool move on surface and can removechip from surface of work piece. in this study al 6061 tube was considered as the work piece andthe effect of finishing parameters such as gap distance between tube and poles, rotational speed oftube, abrasive ration and finishing time on surface roughness was investigated. the mixture offerromagnetic ...

در این پژوهش، به بررسی تاثیر نوع تمپر حرارتی آلیاژ آلومینیوم بر ریزساختار و خواص مکانیکی اتصالات نفوذی آلیاژهای آلومینیوم 6061 (T6,O) و منیزیم AZ31 (O) پرداخته شد. فصل مشترک اتصالات توسط میکروسکوپ‌های‌ نوری (OM) و الکترونی روبشی (SEM) مجهز به آنالیزهای نقطه‌ای (EDS) و خطی (linescane) بررسی شدند. خواص مکانیکی اتصال‌ها با استفاده از آزمون‌های میکروسختی ویکرز و استحکام برشی اندازه‌گیری شد. با توجه...

Journal: :IJMIC 2006
Reginald Crawford George E. Cook Alvin M. Strauss Daniel A. Hartman

A three-dimensional numerical model is used to simulate the Friction Stir Welding (FSW) process using the computational fluid dynamics package ‘FLUENT’. Two mechanical models: the Couette and the Visco-Plastic fluid flow models for Al-6061-T6 were simulated. The simulation results are compared to experimental data for Al 6061-T6 welded at high rotational (1500–5000 rpm) and travel speeds rangin...

2011
Mohammed A. Amin

The electrochemical and corrosion behaviour of Al-6061, Al-4.5%Cu and Al-7.5%Cu alloys were studied in 0.50 M KSCN solution at 25 C. Open-circuit potential, Tafel polarization and ICP-AES measurements were used to study the uniform corrosion process on the surfaces of the tested alloys. Cyclic polarization measurements were employed for pitting corrosion studies. Obtained results were compared ...

Eslami, A., Karimzadeh, F., Zohoori-Shoar, V. ,

In this study, The Al 6061 alloy sheets were produced by Cryorolling process and then were welded by resistance spot welding method. In this regard, the solution treated Al 6061 alloy cryorolled subsequently up to 90% reduction in thickness to produce nanostructure alloy. The cryorolled sheets were then subjected to aging treatment (130˚C-30h) in order to obtain simultaneous strength and ductil...

Eslami, A., Karimzadeh, F., Zohoori-Shoar, V. ,

In this study, The Al 6061 alloy sheets were produced by Cryorolling process and then were welded by resistance spot welding method. In this regard, the solution treated Al 6061 alloy cryorolled subsequently up to 90% reduction in thickness to produce nanostructure alloy. The cryorolled sheets were then subjected to aging treatment (130˚C-30h) in order to obtain simultaneous strength and ductil...

2012
A. Anandha Moorthy N. Natarajan R. Sivakumar M. Manojkumar M. Suresh

The experimental investigation of hybrid metal matrix composites with fly ash and graphite reinforced aluminium alloy (Al 6061) composites samples, processed by stir casting route are reported. The aluminium alloy was reinforced with 3 wt.%, 6 wt.%, 9 wt.% fly ash and fixed 3 wt.% of graphite to mixture the hybrid composite. Hardness of the hybrid composite were tested it was found that when th...

ژورنال: :فرآیندهای نوین در مهندسی مواد 0
مجتبی جعفریان دانشگاه آزاد اسلامی واحد تهران جنوب علیرضا خدابنده دانشگاه آزاد اسلامی واحد علوم و تحقیقات تهران مرتضی جعفریان دانشگاه آزاد اسلامی واحد تهران جنوب

در این پژوهش، به بررسی تاثیر نوع تمپر حرارتی آلیاژ آلومینیوم بر ریزساختار و خواص مکانیکی اتصالات نفوذی آلیاژهای آلومینیوم 6061 (t6,o) و منیزیم az31 (o) پرداخته شد. فصل مشترک اتصالات توسط میکروسکوپ های نوری (om) و الکترونی روبشی (sem) مجهز به آنالیزهای نقطه ای (eds) و خطی (linescane) بررسی شدند. خواص مکانیکی اتصال ها با استفاده از آزمون های میکروسختی ویکرز و استحکام برشی اندازه گیری شد. با توجه ...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید