In this research work, the influence of higher surface hardness on the fretting fatigue life of hard anodized aerospace AL7075-T6 alloy was investigated. An optimization of the parameters of hard anodized Al7075-T6 alloy to obtain higher surface hardness was presented. Confirmation test was carried out to show the improvement after using the best parameter combination attained from the optimiza...

In this research work, an experimental evaluation was conducted to explore the fretting fatigue life of multilayer Cr–CrN-coated AL7075-T6 alloy specimens with higher adhesion strength to substrate as the coating adhesion strength is one of the most critical issues in magnetron sputtering technique. Physical vapor deposition (PVD) magnetron sputtering technique was used for coating purpose, and...

This study presents the design and stress analysis of mobile robot switchover module (track tensioner), which helps the robot to work in hybrid locomotion mechanism. The track tensioner is a loading and unloading module that helps the locomotion system transformability while robot moves either on wheel or track mechanism. The selection of suitable material for its design, the model is therefore...

Abstract Zinc, a soft material with low melting point and high corrosion resistance, was coated onto AZ31B Mg alloy using different cold spraying process parameters. The physical mechanical properties of the resulting Zn/AZ31B samples were then investigated to explore effect parameters on microstructural characteristics. results obtained via X-ray diffraction show formation an intermetallic at ...

Keywords: AL7075-T6 alloy Ti–TiN coating PVD magnetron sputtering Surface roughness Fuzzy logic Fretting fatigue a b s t r a c t In this study, the fretting fatigue resistance of AL7075-T6 alloy is investigated using surface treatment Ti–TiN multilayer coating by physical vapor deposition (PVD) magnetron sputtering technique. A fuzzy logic model was established to forecast the surface roughness...

About 50% of metals used in Aerospace industries are Aluminium and Titanium alloys, Alloys such as Ti6Al4V, AL-7175, and AL7075 are used extensively in space vehicles, aviation, and automotive industries for having enhanced mechanical properties like High strength to weight ratio, low Thermal Expansion and better Corrosion resistance. Comparison of properties Aluminium and Titanium alloys shows...

The construction and application of traditional high-strength 7075 aluminum alloy (Al7075) through selective laser melting (SLM) are currently restricted by the serious hot cracking phenomenon. To address this critical issue, in study, Si is employed to assist SLM printing Al7075. energy density during optimized, effects element on solidification path, relative density, microstructure mechanica...

In the current research work synthesis, characterization, mechanical and wear behavior of 5 and 10 wt. % of nano TiO2 particulates reinforced Al7075 alloy composites are inspected. The Al7075 alloy and nano TiO2 particle composites were provided by melt stir system. After the preparation, the prepared composites were analyzed by SEM, EDS, and XRD for inquiring the microstr...