in this research, softening and ratcheting behaviors of ck20 alloy steel cylindrical shells were studied under displacement-control and force-control cyclic axial loading and the behavior of hysteresis curves of specimens was also investigated. experimental tests were performed by a servo-hydraulic instron 8802 machine. the mechanical properties of specimens were determined according to astm e8...

Power head is the main motive mechanism of rotary drilling rig. High axial pressure and high frequency is one of its typical working conditions. Axial loading test is a key point in power head performance tests. Overall design, system theoretical analysis and simulation of power head axial loading system were carried out. The bond graph model and state equations of power head axial servo loadin...

Measuring icing load and icing rate are important parameters for an atmospheric icing sensor. A new icing sensor has recently been designed and developed at Narvik University College for measuring atmospheric icing rate, icing load and icing type. Unlike the existing atmospheric icing sensors commercially available in market, which uses the axial loading for measuring icing load and icing rate,...

Title: With axial loading during MRI diurnal T2-value changes in lumbar discs are neglectable: a cross sectional study Authors: Leif Torén ([email protected]) Hanna Hebelka ([email protected]) Izabela Kasperska ([email protected]) Helena Brisby ([email protected]) Kerstin Lagerstrand ([email protected]) Version: 2 Date: 21 Dec 2017 Author’s respons...

born on the 15 of October, 1986 in Amsterdam. After graduating high school (Bilingual VWO, Berlage Lyceum, Amsterdam, cum laude) in 2005, he studied medicine at the Vrije Universiteit in Amsterdam. During his studies in 2008, he became involved in spine research through a one-year research internship within the PhD project of dr. R.J. Kroeze, “Adipose stem cells on a biodegradable polymer for s...

Finite element analysis of a tubular T-joint subjected to various loading conditions including pure axial loading, pure in-plane bending (IPB) and different ratios of axial loading to in-plane bending loading has been carried out. This effort has been established to estimate magnitudes of the peak hot spot stresses (HSS) at the brace/chord intersection and to find the corresponding locations as...

PURPOSE The purpose of this study was to investigate the effects of implant tilting and the loading direction on the displacement and micromotion (relative displacement between the implant and bone) of immediately loaded implants by in vitro experiments and finite element analysis (FEA). METHODS Six artificial bone blocks were prepared. Six screw-type implants with a length of 10 mm and diame...

The use of timber in structures like guard-rail systems requires knowledge about the behaviour at high loading rates. The present study aims at presenting a state of art report with respect to the impact bending strength of timber and to some extent to the behaviour of timber joints at high loading rates. The literature review indicates a difference in the experimental results and the conclusio...

the present study utilizes an analytical method to formulate the three lowest modal frequencies of axially-loaded notched beam through both crack location and load level in a specific format that can be used in existing frequency-based crack-identification methods. the proposed formula provides a basis to shift into two states, one with axial loading and the other without any loading whatsoever...

This paper is concerned with analysis for the strengthening effect of carbon fiber-reinforced polymer (CFRP) on steel columns under cyclic lateral loading in thermal environment. Based on the finite element theory of thermo-elastic problem and steel structure stability theory, the hysteretic behavior of axial compression steel columns was studied by using Ansys software. The main variables inve...