An axial oscillation tool is proved to be effective in solving problems associated with high friction and torque in the sliding drilling of a complex well. The fluidic axial oscillation tool, based on an output-fed bistable fluidic oscillator, is a type of axial oscillation tool which has become increasingly popular in recent years. The aim of this paper is to analyze the dynamic flow behavior ...

in the computational fluid dynamics (cfd) modeling of gas-solids two phase flow, the effect of boundary conditions play an important role in predicting the hydrodynamic characteristics of fluidized beds. in this work, the hydrodynamics of conical fluidized bed containing dried tio2 nano-agglomerates were studied both experimentally and computationally. the pressure drop was obtained by pressure...

a numerical model is developed to simulate the transport phenomena in the flow channel between parallel plates with porous and non-porous (or impermeable) walls. the continuity and momentum equations were solved first, assuming the wall reynolds number in the range of with the suction or injection of air at a speed equal to the uniform inlet velocity. the results show that at constant inlet and...

In the computational fluid dynamics (CFD) modeling of gas-solids two phase flow, the effect of boundary conditions play an important role in predicting the hydrodynamic characteristics of fluidized beds. In this work, the hydrodynamics of conical fluidized bed containing dried TiO2 nano-agglomerates were studied both experimentally and computationally. The pressure drop ...

IV. Pressure Drop Definition In our experiments we measure the total pressure drop across the axisymmetric abrupt contraction-expansion geometry. We then systematically correct this to report an ‘extra pressure drop’ associated with the contraction-expansion alone. Table 1 shows the axial distance of each possible pressure transducer location from the contraction plane. For clarity, it is usefu...

A numerical model is developed to simulate the transport phenomena in the flow channel between parallel plates with porous and non-porous (or impermeable) walls. The continuity and momentum equations were solved first, assuming the wall Reynolds number in the range of with the suction or injection of air at a speed equal to the uniform inlet velocity. The results show that at constant inlet and...

This paper pRisents nwneric:a.l analysis of the incompressible turbulent flow field in a single cavity of the stepped multi-cavity seal. The dimensionless bulk pressure drop for the cavity with and without groove has been investigated for four different Reynolds numbers and three different shaft ro~ating speeds. SIMPLER algoritlun is applied to solve the NavierStokes equation and lowReynolds nu...

The effect of thermal and solutal buoyancy induced by a discrete source of heat and mass transfer in a square duct under the influence of magnetic field, especially at the turbulent regime for the first time is reported. Al2O3/water nanofluid is used with constant heat flux from three discrete heat sources. In the present study, the effects of Reynolds number (100 to 3000), particle volume frac...

electrospinning is a method of nanofiber filter media production. by this method, it is possibleto produce media with nanofiber in the range of nanometer to micrometer. nanofibrous media provide a large specific surface area in a finite volume thus they are suitable for filtration applications. in this study, nanofiber non-woven membranes production of nylon-6 by electrospinning method is inves...