ABSTRACT Infrared spectroscopy has been employed for a detailed characterization of ZrO2 and CeO2/ZrO2 supported nickel and copper/nickel catalysts to be utilized for methane decomposition. Adsorption of CO at 303 K was performed in order to determine the surface composition and accessible adsorption sites. Alloy formation occurred during reduction, as indicated by a red-shift of the vibrationa...

OBJECTIVES The aims of this study were to quantify the metallic ions released by various dental alloys subjected to a continuous flow of saliva and to estimate the nutritional and toxicological implications of such a release. METHODS Four pieces of three nickel-based, one noble, one high-noble and two copper-aluminum alloys were cast and then immersed in a continuous flow of artificial saliva...

BACKGROUND: In this paper, a physical method to prepare copper-nickel alloy particles in the sub-micron range for possible self controlled magnetic hyperthermia treatment of cancer is described. It is reported that an increase in tumor temperature decreases the tumor resistance to chemo- and radiation therapies. Self controlled heating at the tumor site to avoid spot heating is managed by contr...

The electrical energy grid has a growing need for energy storage to address short-term transients, frequency regulation, and load leveling. Though electrochemical energy storage devices such as batteries offer an attractive solution, current commercial battery technology cannot provide adequate power, and cycle life, and energy efficiency at a sufficiently low cost. Copper hexacyanoferrate and ...

in this study, cu50-ni50 alloy were synthesized by mechanical alloying. the alloy was then reinforced by dispersion of multiwalled carbon nanotubes using a planetary high energy ball mill. x-ray diffraction, scanning electron microscopy and vibrating sample magnetometer were used to evaluate the effects of cnt addition on the characteristics of the nanocomposites. xrd results of cu-ni sample sh...

The processes of melt formation were studied by methods optical and electron scanning microscopy. These occur during induction brazing a hard alloy to steel holder contact interaction low-melting (copper-zinc system alloy) refractory (iron-nickel) components the solders. It is shown that effect thermal magnetic-dynamic high-frequency electromagnetic field on composite solder how high-strength j...

The oral mucosa is a component of the oral ecosystem, which can be aggressed by corrosion products released from the dental alloys used in prosthetic dentistry therapy. The purpose of this study was to compare the in vivo effect of nickel and copper compounds on the oral mucosa cells, including their ability to induce cell death, by analyzing the cytochrome c (cyt. c) immunohistochemical expres...

MECHANICAL PROPERTIES OF COPPER-NICKEL-TITANIUM ORTHODONTIC WIRES Margaret Rosen, D.M.D. Marquette University, 2016 Introduction: The initial phase of orthodontic therapy relies on flexible wires, usually composed of a nickel-titanium alloy, to apply a substantially constant load during tooth movement. Copper has been added to nickel-titanium archwires, resulting in an alloy with potential clin...

In this research the role of alloying elements on the microstructure and mechanical properties of an as cast and hot rolled high strength low alloy (HSLA) steel was studied. Different compositions with different amount of copper in the presence of nickel, hot rolled and quenched in oil. Tensile test, hardness test, scanning electron microscope (SEM) and optical microscope (OM) were used to eval...

Objective: The aims of this study were to investigate the release of element from, and the biological response in vitro to, cobalt-chromium alloys and other base-metal alloys used for the fabrication of metal-ceramic restorations. Material and methods: Eighteen different alloys were investigated. Nine cobalt-chromium alloys, three nickel-chromium alloys, two cobalt-chromium-iron alloys, one pal...