in this research the experimental and theoretical studies on different enhanced oil recovery (eor) techniques, i.e. water flooding (wf), gas injection (gi) and water alternating gas process (wag) were performed on specimens taken from an iranian carbonate offshore reservoir at the reservoir condition. the experimental results for each specified techniques were compared with the corresponding re...

in many reservoirs, after water flooding, a large volume of oil is still left behind. hot water injection is the most basic type of thermal recovery which increase recovery by improved sweep efficiency and thermal expansion of crude.in the present work, the effects of injection rate and the temperature of the injected water were surveyed by using core flooding apparatus. water flooding was perf...

Wettability alteration has been a sophisticated issue for scientists and reservoir engineers since early 20th century; thus, many investigations have been carried out to determine wettability and enhance it to ideal conditions, which leads to improvement in oil recovery. Dilute surfactant flooding has been approved as one of the noteworthy methods in chemical flooding. Several petroleum reservo...

various researches on laboratory and field scale illustrate that manipulating the ionic composition and the ion concentration of injected water can affect the efficiency of water flooding and the interaction of injected water with rock and other fluids present in porous media. the objectives of this paper are to investigate parameters that affect low salinity water flooding; mainly the effect o...

In this study, simulation of low salinity polymer flooding in the core scale is investigated using Eclipse-100 simulator. For this purpose, two sets of data are used. The first set of data were adopted from the results of experimental studies conducted at the University of Bergen, performed using Berea sandstone and intermediate oil. The second data set, related to sand pack and heavy oil syste...

core flooding experiments were conducted with the objective of evaluating near miscible surfactant alternating co2 injection and the effect of surfactant concentrations on gas-oil and water displacements in porous media. the core samples were provided from a low permeability mixed wet oil reservoir at 156 °f and 1900 psia. in addition, very few studies of surfactant adsorption on carbonate mine...

A successful cross-linked polymer flooding has been implemented in JD reservoir, an ordinary heavy oil reservoir with high permeability zones. For all that, there are still significant volumes of continuous oil remaining in place, which can not be easily extracted due to stronger vertical heterogeneity. Considering selective plugging feature, polymer enhanced foam (PEF) flooding was taken as fo...

The Adaptive Core Multicast Routing Protocol (ACMRP) is proposed for multicast routing in ad hoc networks. ACMRP is on demand core-based multicast routing protocol and uses a multicast mesh. In ACMRP, a core is not well-known and it adapts to the current network topology and group membership. The enhanced adaptivity minimizes the core dependency and, accordingly, improves performance and robust...

Various researches on laboratory and field scale illustrate that manipulating the ionic composition and the ion concentration of injected water can affect the efficiency of water flooding and the interaction of injected water with rock and other fluids present in porous media. The objectives of this paper are to investigate parameters that affect low salinity water flooding; mainly the effect o...

a bacterial strain (designated as alcaligenes sp. ms-103) isolated from oil sample of the aghajari oilfield in the south of iran, was able to produce an effective extracellular lipopolysaccharide biosurfactant (1.2±0.05 g/l) on molasses as a sole carbon source. the highest surface tension reduction to level 20 mn/m was achieved by biosurfactant produced by cells grown on molasses under optimum ...