in this study, the effect of cold rolling process on the microstructure and texture evolution in 1wt. % si non-orientedelectrical steel was investigated. for this purpose, all samples were processed through single-stage hot rolling at1100 ° c and two-stage cold rolling (cross rolling and unidirectional rolling) with intermediate annealing at 650 °cfor 35 seconds. finally, all of them were fully...

In this study, the effect of cold rolling process on the microstructure and texture evolution in 1wt. % Si non-oriented electrical steel was investigated. For this purpose, all samples were processed through single-stage hot rolling at 1100 ° C and two-stage cold rolling (cross rolling and unidirectional rolling) with intermediate annealing at 650 °C for 35 seconds. Finally, all of them were fu...

Parts produced by microforming are becoming ever smaller. Similarly, the foils required in micro-machines are becoming ever thinner. The asymmetric rolling technique is capable of producing foils that are thinner than those produced by the conventional rolling technique. The difference between asymmetric rolling and conventional rolling is the 'cross-shear' zone. However, the influence of the c...

wheel numeric and different versions of mobility numbers are important models for predicting the rolling resistance. in this study, data related to the rolling resistance of cross ply and radial ply tires were compared with the resultant values from several models. also, the preciseness of models in rolling resistance prediction was evaluated. for this purpose f test and 1-1 line method (p≥ 0.0...

The cross-rolling is a new process that results in significant evolutions in microstructure of the metallic sheets. In this study, an aluminium 1050 sheet was rolled up to 95% reduction in cross directions for ten passes. The rolled samples were investigated by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The rolled samples possess a high dislocation density and ultra-fin...

Wheel numeric and different versions of mobility numbers are important models for predicting the rolling resistance. In this study, data related to the rolling resistance of cross ply and radial ply tires were compared with the resultant values from several models. Also, the preciseness of models in rolling resistance prediction was evaluated. For this purpose F test and 1-1 line method (p≥ 0.0...

Finite element analysis for cross rolling of AISI 304 austenitic stainless steel has been carried out by rotating the plate by 90° in between the passes. To analyze stress and strain fields in the material for cross rolling, a full 3D model of work-roll and plate has been developed using rigid-viscoplastic finite element method. The stress and strain fields, considering von Mises yield criteria...

in this study, the effects of nitrogen addition on the production of ultrafine/nano grained aisi 201l stainlesssteel by advanced thermo-mechanical process were investigated. cast samples were first homogenized at 1200 °c for 4 h, hot-rolled at 1100 °c and finally, solution-annealed at 1150 °c for 2.5 h. unidirectional and cross multipass cold rolling at 25 °c was carried out to 90% reduction in...

In this paper, we investigate the properties of generalized bent functions defined on Z2 with values in Zq , where q ≥ 2 is any positive integer. We characterize the class of generalized bent functions symmetric with respect to two variables, provide analogues of Maiorana–McFarland type bent functions and Dillon’s functions in the generalized set up. A class of bent functions called generalized...