bioleaching processes for extraction of cu and mo from molybdenite cons. are more environmentally friendly and consume less energy than conventional technologies, yet less economically efficient. one necessary step towards arriving at a cost-effective bioleaching process is using appropriate methodology to optimize pertinent factors in such processes. to this end, the present study employed res...

Bioleaching processes for extraction of Cu and Mo from molybdenite cons. are more environmentally friendly and consume less energy than conventional technologies, yet less economically efficient. One necessary step towards arriving at a cost-effective bioleaching process is using appropriate methodology to optimize pertinent factors in such processes. To this end, the present study employed Res...

This study evaluates the effects of different additives such as silver ion, medium and energy sources on the efficiency of mixed moderate thermophilic bioleaching approach to extract Cu, Mo and Re from molybdenite concentrate containing 0.98% Cu, 1.56% Fe, 53.84% Mo, and 0.055% Re. Molybdenite was the major phase of Mo-bearing mineral and chalcopyrite, covellite and pyrite were distinguished as...

cu-mo and cu-ti contact structures were fabricated on multi-crystalline silicon substrates to provide a low resistance ohmic contact. deposition steps are done in an excellent vacuum chamber by means of electron beam evaporation and samples are then annealed for the realization of an efficient alloy layer. the effects of process parameters such as film thickness, annealing duration and temperat...

This paper documents the exploration significance of Ag/Au, Au/Cu, Cu/Mo and (Ag×Au)/Cu×Mo) ratios of the supra-ore and sub-ore halos versus fluid inclusion evolution for 24 Cu, 6 Cu- Mo and 10 Cu-Au porphyry deposits worldwide. The ratios are based only on the economic and mineralized hypogene alteration zones. The results indicate that (Ag×Au)/(Cu×Mo), Au/Cu and Cu/Mo ratios increase with dec...

The purpose of this study is to identify the enriched zones of Cu, Mo and Re in Nowchun Mo-Cu porphyry deposit (SE Iran) based on subsurface data and using of concentration–volume (C–V) fractal model. The C-V model illustrates four and five geochemical zones based on Mo and Cu distributions respectively and there are three geochemical populations for Re. The main mineralization for Mo, Cu and R...

The electrochemical behavior of rhodium at low-temperature carbamide-chloride and acetamide-chloride melts was investigated. It was found that, during rhodium anodic dissolution in carbamide and acetamide containing chloride melts, mixed complexes [Rh(NH3)4Cl2]+ of quasi-octahedral symmetry D4h are produced. The composition and structure of nascent complex ions have been studied. During electro...

In this research, selective flotation of Mo from the Sungun Cu-Mo concentrate was evaluated in different operating conditions. It was found that the addition of 16 kg/t Na2S into flotation pulp and aeration decreased rapidly the initial oxidized- reduction potential (ORP) of the pulp from +228mV to -597 mV (with reference to standard Ag/AgCl electrode) and increasing the amount of Na2S by 50kg/...

Groundwater samples were collected from wells in Cross River State (Nigeria) and analysed for trace elements including Ba, Co, Cr, Cu, Fe, Li, Mn, Mo, Ni, Pb, Rb, Sr and Zn. The primary aim of the study was to determine the baseline concentrations of these metals, while the secondary aim was to assess the present level of pollution, as a basis for future impact of human and industrial activitie...

In this study, a high energy planetary ball milling technique was used to synthesize nano-crystalline Mo-Cu alloys. Molybdenum trioxide (MoO3) and copper oxide (CuO) were used as the starting materials. Carbo-thermal co-reduction of mixed Mo and Cu oxides powders was done with milling followed by a heat treatment at a high temperature. Differential thermal analysis/thermogravimetric (DTA/TG) wa...