this paper describes a series of laboratory model tests on strip footings supported on unreinforced and geogrid-reinforced sand with an inside void. the footing is subjected to a combination of static and cyclic loading. the influence of various parameters including the embedment depth of the void, the number of reinforcement layers, and the amplitude of cyclic load were studied. the results sh...

analytical detection of cracking in connections of steel moment resisting frames using simple damage indices is important since these cracks are not visible unless the connections are uncovered. in this paper, applicability of three cumulative damage indices for detection of cracking in a cover plate welded moment connection is investigated. the damage indices considered in this study are based...

Buckling restrained braced frames (BRBFs) for seismic load resistance have been widely used in recent years. One of the key requirements for a buckling restrained brace is to sustain large plastic deformations under severe ground motions. The core of a buckling restrained brace is prone to fatigue fracture under cyclic loading. The earthquake induced fracture type of the core plate in a bucklin...

This paper presents a low cycle fatigue life curve by simulating a crack in a cover plate welded moment connection. Initiation of ductile fracture in steel is controlled by growth and coalescence of micro-voids. This research used a numerical method using finite element modeling and simulation of ductile crack initiation by a micromechanical model. Therefore, a finite element model of a cover p...

expansive soils show swelling and shrinkage behavior when subjected to cyclic wetting and drying. the variation in water content influence the volume change in this kind of soil. these volume changes can cause ground movement which may result in damage to the buildings and structures. to study the behavior, a number of successive wetting-drying cycles were conducted on a statically compacted ex...

Hollow nanoparticles (NPs) are produced by void nucleation and growth during chemical reactions. However, there is no proper understanding of nucleation and growth mechanisms and their predictive modeling. Models based on the Kirkendall effect predict the process time, which is larger by orders of magnitude than in experiment. This is why some works propose that a large tensile pressure in the ...

Dust formation and growth in plasmas are in most cases continuous cyclic phenomena. We show that the growth of new dust generations takes place in a dust-free region, usually called a void, in the dust cloud. The three-step process of new dust generation is detailed thanks to the correlation between electrical, optical, and ex situ diagnostics. The strong inhomogeneity of both the plasma and th...