the hot compression tests were carried on x45crniw189 valve steel (x45) in the temperature rangeof 1000– 1200 °c and the strain rate range of 0.004 – 0.5 s-1 in order to study the high temperaturesoftening behavior of this steel. for the exact prediction of flow stress, the effective stress-effectivestrain curves were obtained from experiments under various conditions. on the basis of experimen...

Accurate predictions of the amount and the rate of long- term deformation of reinforced soils under an applied load are important key issue in geotechnical engineering, in which the deformation of soil develops with time at a state of constant effective stress. Since geosynthetic is generally considered creep sensitive therefore, evaluation of creep behavior of geosynthetic reinforced soil (GRS...

The hot deformation behavior of a typical martensitic stainless steel containing 2.1% Ni was investigated by means of the compression test in the strain rate range of 0.001-1 s-1 and temperature range of 950-1150 °C. The flow behavior of the steel was evaluated using the flow stress curves and flow softening map and by microstructural investigation. Taking into account of the strain effect on t...

Scanning the deformation behavior of real objects is a useful technique to acquire physically realistic behavior. It has been shown previously how to acquire physically realistic object behavior for small deformation and how to render the behavior at interactive rates. This paper introduces a novel method to extend previous work to handle large scale deformation. We model large scale deformatio...

The role of microstructure on hot deformation behavior of sintered Cu-28Zn prealloyed powder compacts was investigated by a series of isothermal hot compression tests in the temperature range of 550- 850°C at strain rates of 0.001, 0.01, 0.1 and 0.5 s-1, by taking into consideration the Hyperbolic Sine functional behavior to analyze the deformation behavior of the alloy. The results indicate th...

the effects of carbon content on the dynamic and static softening mechanisms of ti microalloy steels were investigated both in ferrite and austenite regions. the results obtained showed that recrystallization rate decreased as the percentage of carbon content was increased from 0.0035 to 0.110. this is due to the ti(cn) and tic precipitates and also the free carbon content. in the ferrite regio...

to investigate the hot deformation behavior of 17-7 ph stainless steel, hot compression tests were carried out at the temperatures of 950, 1050 and 1150 oc and strain rates of 0.001 s-1 to 0.1 s-1. accordingly, the hot working behavior was studied by the analyses of flow stress curves, work hardening rate versus stress curves, exponent- type constitutive equations and deformed microstructures. ...

in this work, dynamic mechanical properties of three high-manganese steels with trip/twip or fully twip characteristics are studied. high strain rate experiments in the range of true strain rates between ~500 and 1800 /s are conducted using a dynamic torsional testing setup. all the three steels show a positive strain rate sensitivity in the intermediate range of strain rates (up to 500 /s). bu...

it is well-known that severe deformation to metals causes a direct grain refinement of the matrix without special heat-treatments due to the mechanism of dynamic continuous recrystallization (dcr). however, the microstructural revolution during severe deformation is seemed to be different depending on the deformation mode, namely the direction of deformation. in general, multi-directional defor...