in this study, the effect of tensile test temperature (148 to 673 k) on the microstructural evolutions and the mechanicalproperties of high manganese twinning induced plasticity (twip) steel with the chemical composition of fe-31mn-3al-3si (wt. %) was investigated. xrd, sem and tem were used to study the microstructural evolutions.stacking fault energy (sfe) of the alloy was also calculated by ...

The grain size refinement of AISI 422 martensitic stainless steel in the temperature range of 950-1150 ºC was investigated by hot deformation tests. The deformed specimens were held at deformation temperature with delay times of 5 to 300s after achieving a strain of 0.3. The austenite grains exhibit a considerable growth at temperature higher than 1050˚C, while the grain coarsening is negligibl...

concrete deformation due to temperature and moisture condition will always develop simultaneously and interactively. the environmentally (hygral and thermally) induced stress and deformation are essential to concrete durability. to simulate the deformation of concrete caused by the coupling effect of temperature and moisture, a numerical simulation approach is proposed comprising analytical pro...

In hot forming process, the workpiece undergoes plastic deformation at high temperature and the microstructure of the workpiece changes according to the plastic deformation. These changes affect the mechanical properties of workpiece. In order to optimize this process, both the plastic deformation of workpiece and its microstructural changes should be taken into consideration. Since material be...

In hot forming process, the workpiece undergoes plastic deformation at high temperature and the microstructure of the workpiece changes according to the plastic deformation. These changes affect the mechanical properties of workpiece. In order to optimize this process, both the plastic deformation of workpiece and its microstructural changes should be taken into consideration. Since material be...

Deformation, a key concept in our understanding of heavy nuclei, is based on a mean-field description that breaks the rotational invariance of the nuclear many-body Hamiltonian. We present a method to analyze nuclear deformations at finite temperature in a framework that preserves rotational invariance. The auxiliary-field Monte Carlo method is used to generate a statistical ensemble and calcul...

the dissipated energy from periodic deformation is regarded as the main reason for heat generation and temperature rise inside the tire domain. however, the mechanical behavior of rubber parts is highly temperature dependent. in most performed investigations, the influence of thermal effects on stress/ deformation fields of pneumatic tires is ignored and just temperature distribution is conside...

severe plastic deformation (spd) methods were developed for producing of metals and alloys with ultrafine grained (ufg) microstructures having high strength. parallel tabular channel angular pressing (ptcap) as a noble severe plastic deformation (spd) method was used to produce ultrafine grained (ufg) and nanostructured cu-30%zn tubes. in this paper, the effect of ptcap process temperature on t...

By means of superplastic tensile test above the Ac1 temperature (γ→α transformation temperature), superplastic deformation activation energy of ultrafine-grained commercial die steel CrWMn is investigated on the basis of the Arrhenius theory equation, ) / exp( 1 RT Q A m − = σ ε& , which indicates the resistance of the superplastic deformation. According to the Arrhenius equation, the activatio...