The economy of desulfurization system is of great significance for operation of desulfurization system and improving the environment quality in power plant. Based on the desulfurization power price policy, this paper analyzes the cost and benefit structure of the wet flue gas desulfurization system in Chinese power plant; that puts forward the calculation methods of total cost present value, to...

H-ZSM5, Zn/H-ZSM5, and Co/H-ZSM5 catalyze thiophene desulfurization with high H2S selectivity using propane as the exclusive hydrogen source. Desulfurization rates and selectivities were much higher than at the H2 concentrations present during propane reactions. Zn+2 and Co+2 cations at exchange sites increased desulfurization rates. On H-ZSM5, desulfurization rates and selectivities with propa...

Depending on the desulfurization reaction temperature, it can be divided into fly ash generated at hightemperature furnace zone and at low-temperature flue gas zone. For simulating those two kinds of desulfurization ash, the ordinary fly ash mixed with different weight percentage of CaSO4·2H2O is divided into 2 groups, the first group is followed by calcining at 900°C, another drying at 100°C. ...

The micro morphology of limestone sorbent is a key for improving the SO2 removal efficiency in the coal-fired power plant. The tube furnace system was built for imitating the indirect desulfurization reaction in traditional boiler atmosphere (65%N2, 15%CO2, 4.7%O2, 15%H2O, 0.3%SO2) and the direct desulfurization reaction in oxygen-fired atmosphere (80%CO2, 4.7%O2, 15%H2O, 0.3%SO2). The reacted ...

The purpose of this study was to investigate the reuse of desulfurization slag in cement clinker production and its influence on the formation of clinker phases. The desulfurization slag that mainly contained Ca and Si was identified as non-toxic, and thus it should be suitable to be reused in clinker production. The addition of desulfurization slag increased the melt phase during clinkerizatio...

In this work, an N-butyl-pyridinium-based ionic liquid [BPy]BF(4) was prepared. The effect of extraction desulfurization on model oil with thiophene and dibenzothiophene (DBT) was investigated. Ionic liquids and hydrogen peroxide (30%) were tested in extraction-oxidation desulfurization of model oil. The results show that the ionic liquid [BPy]BF(4) has a better desulfurization effect. The best...

In making the gas-solid-liquid phase analysis, based on the collaborative study of the internal and external humidification ratio of desulfurization efficiency, determine the humidifier ratio within 60% to 75%, that can make the best balance between the respective merits of a simple tower humidifiers tower humidifier way, optimizing the overall desulfurization reaction, effectively reducing the...

Recently, sulfur (S)-vacancies created on the basal plane of 2H-molybdenum disulfide (MoS2) using argon plasma exposure exhibited higher intrinsic activity for the electrochemical hydrogen evolution reaction than the edge sites and metallic 1T-phase of MoS2 catalysts. However, a more industrially viable alternative to the argon plasma desulfurization process is needed. In this work, we introduc...

Because of the requirement for low sulfur content of fuel oils, it is necessary to develop alternative methods for desulfurization of heavy fuel oil. Due to the disadvantages of HDS technologies such as costs, safety and green environment, new methods have been developed. Among these methods is ultrasoundassisted oxidative desulfurization. Using ultrasound-assisted oxidative desulfurization, co...

In the process of desulfurization, will produce a lot of the desulfurization liquid, desulphurization waste liquid containing high concentrations of salt, has the very good use value. If direct emissions will not only damage to the environment, but also wastes resources The reduction of the pollution resulting from desulfurization was studied. Rotary evaporator was employed to simulate vacuum c...