نتایج جستجو برای: Dry sand/rubber-wheel abrasion
تعداد نتایج: 111044 فیلتر نتایج به سال:
Abrasion susceptibility of highway pavements has a great impact on the skid resistance, and consequently accident rate. A rotational abrasion device is introduced, providing the advantage of field simulation of wheel passage, in comparison with existing standard methods. The device was used to measure abrasion susceptibility of concrete pavements with different textures. The obtained results we...
the aim of the present study was to investigate the effect of quenching and tempering temperatures on themicrostructure, mechanical properties and the wear characteristics of medium carbon-high chromium wear resistantsteel. in addition, the dominant wear mechanisms were studied. for this purpose, austenitizing and temperingtemperatures were selected in the ranges of 900- 1000 °c and 300- 500 °c...
We present a method to recognize a complicated curved object from an image contour. We are developing a system that automatically measures train wheel abrasion from its contour image. Because a train wheel consists of a curved surface, the transformation of the image contour due to position variation affects the measurement accuracy. The 3D shape model of the train wheel is analyzed to compute ...
-Hardfacing is one of the most useful and economic ways to improve the performance of components submitted to severe wear conditions. A study was made to compare the microstructure and abrasion resistance of hardfacing alloys reinforced with primary chromium carbides, the hardfacing alloys were deposited onto M.S. plate by SMAW process. Two different commercial hardfacing electrodes were employ...
This paper presents the characterization of a secondary cone crusher concave liner made Hadfield steel used in Chilean mining after crushing copper minerals during all service life. During use, suffers indentation (cold working) and abrasion; this combination provides with layer that constantly renews itself, maintaining surface highly resistant to abrasive wear. The results presented here were...
Abstract Fusion-bonded and low-diluted overlay welded coatings are frequently very thick (>1mm). High-speed laser cladding is a novel process capable of producing thin fusion-bonded with high coverage rates low heat input. In this study, for the first time, high-speed was used to fabricate relatively Ni-based reinforced chromium carbides onto low-alloy structural quenched tempered steels. Ob...
tillage and press wheel weight play an important role in seedling emergence, crop establishment and growth. an optimal combination of tillage implements and suitable press wheel weights should increase grain yield. this study investigated the effect of tillage systems and press wheel weights on dry land wheat (triticum aestivum l.) seedling emergence and grain yields in izeh, khuzestan province...
An experiment is conducted in which a free-standing bicycle wheel is given an initial angular speed and then allowed to slow down to rest. Measurements of the wheel speed, using a magnetic sensor, during the decay are compared to predictions from a model accounting for a combination of viscous and dry friction at the wheel bearing. The time history data indicate two dynamic regimes: (i) a highe...
Single screw compressors (SSCs) have been used in many fields. Compared with other kinds of compressors, the SSC should have many advantages due to its symmetrical structure and well balanced radial gas pressure on the screw rotor. However, its durability is not as good as expected. After operating for several thousand hours, its flow rate often decreases sharply. The essential reason is that t...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید