نتایج جستجو برای: Dual،phase steel
تعداد نتایج: 81281 فیلتر نتایج به سال:
Purpose: The aim of the paper is to design heat treatment conditions of dual-phase steel and to determine their influence on the structure and mechanical properties of steel. Design/methodology/approach: The heat treatment of the C-Mn steel in order to obtain a dual-phase ferritic – martensitic structure of desirable phase fractions was realized. To investigate the influence of heat treatment p...
Softening frequently occurs in dual-phase steels under isothermal tempering of martensite. Recently, non-isothermal tempering is implemented to decrease the softening process in dualphase steels. Here, we have discovered using high power electropulsing treatment can significantly enhance the strengthening effects via the formation of ultrafine-grained ferrite with nano-cementite particles in te...
seismic retrofit strategies have been developed in the past few decades following the introduction of new seismic provisions and the availability of advanced materials and methods. it can be observed that new approaches to deal with more lateral forces are more innovative and more energy absorbent. in line with this, there is a growing trend toward the use of steel shear walls as a system with ...
This work presents a novel diffusion based dualphase molecular communication system where the source leverages multiple cooperating nanomachines to improve the end-toend reliability of communication. The Neyman-Pearson Likelihood Ratio Tests are derived for each of the cooperative as well as the destination nanomachines in the presence of multiuser interference. Further, to characterize the per...
فرآیند نورد تجمعی (accumulative roll bonding (arb)) یکی از رایج ترین روش ها برای تولید مواد ورقه ای فوق ریزدانه شده می باشد. این روش شامل چرخه های مختلفی از نورد، برش و پشته سازی است و تا مرز امکان می تواند تکرار شود. در این تحقیق، کامپوزیت چندلایه al/steel با استفاده از ورق های 1100al- و 12st- به روش arb و تا سه چرخه تولید شد. میکروساختار و خواص مکانیکی کامپوزیت چندلایه al/steel در چرخه های مخ...
run-out-table (rot) is located between last finishing stand and down coiler in a hot strip mill. as the hot steel strip passes from rot, water jets impact on it from top and bottom and strip temperature decreases approximately from 800-950 °c to 500-750°c. the temperature history that strip experience while passing through rot affects significantly the metallurgical and mechanical properties, s...
AlCoCrFeNi High Entropy Alloys were here synthesized by the combination of Planetary Ball Milling and Spark Plasma Sintering at 1100 °C. The relatively low rotating speed led to a peculiar agglomerate state referred as “Mechanical Activated”. reactive sintering activated agglomerates leads unique dualphase microstructure: sintered sample exhibited distinctive nanostructured lamellar microstruct...
حالت های مختلف آلیاژ حافظه دار شکلی در یک مهاربند پیشنهادی به منظور به دست آوردن رفتار بهینه استفاده شده اند. مهاربند پیشنهادی قابلیت استهلاک انرژی بالا در عین حال رفتار بازگردانندگی دارد. در این تحقیق ابتدا مقایسه بین قاب با مهاربندهای sma و قاب با مهاربندهای steel شده است، در نهایت جهت بدست آوردن حالت بهینه از ترکیب دو حالت بالا استفاده شده است که این امر سبب کسب خواص برتر هردو نوع مهاربند در...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید