نتایج جستجو برای: Duplex stainless steel and X-ray microscopy

تعداد نتایج: 16985076  

Journal: :journal of advanced materials and processing 0
oladayo olaniran metallurgical & materials engineering federal university of technology, pmb 704, akure, ondo state, nigeria

abstract this work investigated the electrochemical and aqueous tribological behavior of hot pressed 2205 duplex stainless steel (dss). dss sintered composites of different volume percent (% vol) of partially stabilized zirconia (psz) was developed using powder metallurgy (pm) technique. electrochemical behaviour was studied at room temperature, using open circuit potential and potentiodynamic ...

Shamanian, M., Abdolvand, R. , Allafchian, A. , Atapour, M.,

Transient liquid phase bonding of  UNS S32750 super duplex stainless steel to AISI 304 austenitic stainless steel using BNi-2 interlayer was carried out at 1050 oC for 45 min. Microstructure analyses of the joint were carried out using optical microscopy, scanning electron microscopy and energy-dispersive X-ray spectroscopy. Microhardness indentation and shear strength test were performed to as...

Shamanian, M., Abdolvand, R. , Allafchian, A. , Atapour, M.,

Transient liquid phase bonding of  UNS S32750 super duplex stainless steel to AISI 304 austenitic stainless steel using BNi-2 interlayer was carried out at 1050 oC for 45 min. Microstructure analyses of the joint were carried out using optical microscopy, scanning electron microscopy and energy-dispersive X-ray spectroscopy. Microhardness indentation and shear strength test were performed to as...

H. Eskandari Iman Danaee, M. Ebrahimi S. Nikmanesh

In this study, the effect of molybdate on the electrochemical behavior and semi-conductive properties of duplex stainless steel 2205 passive film at NaCl solutions was investigated. Cyclic potentiodynamic polarization, impedance spectroscopy, mott-schottky plots and scanning electron microscopy (SEM) were used to study the passive behavior. Polarization curves showed that the corrosion current ...

The influence of heat-input and pre-heat treatment on the structure, mechanical and corrosion behaviors of 2205 duplex stainless steel joint by means of GMAW process was the goal of this study. In this regards, the welding process was done using different heat input in the range of 0.6 to 1.4 kJ/mm and different pre-heating treatments in the range of 25 to 100 oC. The microstructural properties...

The influence of heat-input and pre-heat treatment on the structure, mechanical and corrosion behaviors of 2205 duplex stainless steel joint by means of GMAW process was the goal of this study. In this regards, the welding process was done using different heat input in the range of 0.6 to 1.4 kJ/mm and different pre-heating treatments in the range of 25 to 100 oC. The microstructural properties...

Journal: :Acta Metallurgica Slovaca 2022

This paper deals with the solid state diffusion bonding of X70 steel to duplex stainless steel. Microstructure and mechanical properties welded dissimilar steels were investigated. Optical microscopy, Electron Backscatter Diffraction, energy dispersive spectrometry, Vickers hardness measurements, X-Ray Diffraction main techniques characterization. Microtructural variation was observed in side c...

2011
Masafumi Matsushita

Bronization and carburization of fine-grain superplastic stainless steel is reviewed, and new experimental results for fine grain Ti88.5Al4.5V₃Fe₂Mo₂ are reported. In superplastic duplex stainless steel, the diffusion of carbon and boron is faster than in non-superplastic duplex stainless steel. Further, diffusion is activated by uniaxial compressive stress. Moreover, non-superplastic duplex st...

Super duplex stainless steel is a kind of duplex stainless steel that has pitting resistant equivalent number over than 40. Unified Numbering System (UNS) S32750 is a common super duplex stainless stee, that is mostly applied in oil and gas refinery industries, because of its proper corrosion-resistant properties . Therefore, joining of these steels by welding is very important, but the greates...

Journal: :روش های عددی در مهندسی (استقلال) 0
محمدعلی گلعذار m. a. golozar

in this paper, the nucleation and growth of diamond/diamond-like coatings on austenitic (aisi 316) and ferritic (aisi 430) stainless steel substrates have been investigated using torch technique. the effects of substrate surface preparation has also been studied. the quality of coatings produced has been examined using optical and scanning electron microscopy, x-ray diffraction, raman spectrosc...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید