This study has investigated the creep properties of asphaltic concrete modified with different dosages of waste polyethylene terephthalate (PET) in two different ranges of size. Uniaxial dynamic creep test at 40°C was conducted on the cylindrical specimens of the mixtures. The load was applied in two different frequencies of 0.5 and 5Hz. Creep test results showed that the accumulated strain und...

in petrochemical industry, the production of polyvinyl chloride (pvc) is accompanied by formation of heavy end wastes which consist of a mixture of di and multichloro compounds as kind of materials which are generated in ethylene dichloride (edc) purifcation. a high quantity of chloro compounds found in the heavy end waste allows it to be polymerized with alkaline polysulfdes to form polysulfde...

pavement permanent deformations due to lack of shear strength in mixture are a major reason of rutting. any simple test to determine mixtures resistance to permanent deformation isn’t distinguished in the 1st level of superpave mix design method and prevalent methods for evaluating mixture rut resistance are expensive and time-consuming. two aggregate types, gradations, asphalt cements and fill...

spark plasma sintering (sps) method, as plasma activated sintering, is a method applicable for rapid sintering of metals and ceramics. owing to the advantage of rapid heating, the alumina ceramics obtained by sps have a grain size and density comparable to those of hot pressed ones. the increase of densification rate may be related to some difference in ion transport characteristics. this study...

The tail tendons from wallabies (Macropus rufogriseus) suffer creep rupture at stresses of 10 MPa or above, whereas their yield stress in a dynamic test is about 144 MPa. At stresses between 20 and 80 MPa, the time-to-rupture decreases exponentially with stress, but at 10 MPa, the lifetime is well above this exponential. For comparison, the stress on a wallaby tail tendon, when its muscle contr...

The aim of this project was to see whether the tendon would show creep during long-term dynamic loading (here referred to as dynamic creep). Pig tendons were loaded by a material-testing machine with a human Achilles tendon force profile (1.37 Hz, 3% strain, 1,600 cycles), which was obtained in an earlier in vivo experiment during running. All the pig tendons showed some dynamic creep during cy...

De Zee, M., F. Bojsen-Møller, and M. Voigt. Dynamic viscoelastic behavior of lower extremity tendons during simulated running. J Appl Physiol 89: 1352–1359, 2000.—The aim of this project was to see whether the tendon would show creep during long-term dynamic loading (here referred to as dynamic creep). Pig tendons were loaded by a materialtesting machine with a human Achilles tendon force profi...

This research aims to explore the dynamic characteristics and settlement prediction of soft soil. Accordingly, the dynamic shear modulus formula considering the vibration frequency was utilized and the dynamic triaxial test conducted to verify the validity of the formula. Subsequently, the formula was applied to the dynamic creep strain function, with the factors influencing the improved dynami...

Recent studies concerning the fixation of cemented total hip arthroplasty (THA) have led to new hypotheses about the dynamic, long-term failure mechanisms leading to prosthetic loosening. As a result, the long-term mechanical behavior of acrylic bone cement has gained more interest since little is known about these properties. In this study, the dynamic, compressive creep deformation of acrylic...

A simple model based on the Orowan equation and the dynamic evolution of the dislocation structure by generation and merging of slipped areas is used to see which experimental results on creep of pure and solute-hardened crystalline materials can or cannot be explained with regard to creep with refinement or coarsening of the dislocation structure and steady-state creep. Quantitative deficienci...