Ceramic powder (zirconia) was mixed with binder consisting polypropylene, paraffin and stearic acid in elastic extruder. Steady and oscillatory shear flow properties of these materials in the molten state were measured on a cone-plate rheometer; parallel superposed steady and oscillatory shear flow experiments were also carried out. Moreover, flow properties at high shear rates were measured on...

The dynamic and static yield stress of fresh cement mortar were measured in a rotational rheometer with a vane geometry using shear rate and shear stress-controlled protocols, respectively. Through a shear rate-controlled steady-state protocol, the equilibrium flow curve is measured and fitted with the Bingham model to obtain dynamic yield stress. A negative slope in the equilibrium flow curve,...

Recycled asphalts were evaluated based on SHRP binder specification. DSR (Dynamic Shear Rheometer) and BBR (Bending Beam Rheometer) tests were carried out on samples of the recycled asphalts under three conditions: original binder, RTFOT (Rolling Thin Film Oven Test) residue and RTFOT+PAV (Pressurized Aging Vessel) residue. PG (Performance-Graded) classification was conducted. New straight asph...

Accurate mechanical property data obtained at large shear deformations and high frequencies are a fundamental component of realistic numerical simulations of soft tissue injury. Although many commercial systems exist for testing shear properties of viscoelastic materials with properties similar to soft biological tissue, none are capable of determining properties at high loading rates necessary...

Steady shear flow properties of Acacia tortuosa gum aqueous dispersions at different concentrations (15–40% w/v) were studied at 20 C using a controlled shear rate Couette rheometer and Mooney–Ewart sensor systems. Flow curves showed shear thinning non-Newtonian behaviour with a tendency to a Newtonian plateau at high-shear rate. The results obtained fitted the Sisko model very well. The influe...

We investigate a variety of different polymer solutions in shear and elongational flow. The shear flow is created in the cone-plate-geometry of a commercial rheometer. We use capillary thinning of a filament that is formed by a polymer solution in the Capillary Breakup Extensional Rheometer (CaBER) as an elongational flow. We compare the relaxation time and the elongational viscosity measured i...

In this paper, the effect of reclaimed rubber modification on the rheological characteristics of asphalt binders is studied. Reclaimed rubber with the extent of 12, 16 and 20 is added to the neat asphalt binder and then shear complex modulus is obtained for neat and modified asphalt binder via Dynamic Shear Rheometer (DSR) test. Using Christensen-Anderson- Marasteanu (CAM) model, master curves ...