an oil and gas well cementing in gachsaran formation, where sustained annular pressure has been reported in many wells, presents a big challenge in maroon field. the main challenges are preventing gas migration and achieving zonal isolation using a competent cement sealant system which is able to withstand downhole stresses and high temperatures during production cycles. unlike conventional cem...

An oil and gas well cementing in Gachsaran formation, where sustained annular pressure has been reported in many wells, presents a big challenge in Maroon field. The main challenges are preventing gas migration and achieving zonal isolation using a competent cement sealant system which is able to withstand downhole stresses and high temperatures during production cycles. Unlike conventional cem...

the main purpose of cementing of the well is to provide effective zonal isolation for the entire life of wells. the standard cements cannot prevent loss of zonal isolation when the stress level in the well cement is severely fluctuated. since elastic cements improve elastic properties, recently, a number of studies have been done in this area. for this purpose, a nanoparticle, named ex-ripi, wa...

The main purpose of cementing of the well is to provide effective zonal isolation for the entire life of wells. The standard cements cannot prevent loss of zonal isolation when the stress level in the well cement is severely fluctuated. Since elastic cements improve elastic properties, recently, a number of studies have been done in this area. For this purpose, a nanoparticle, named EX-RIPI, wa...

abstract objective: the aim of this study was to evaluate the efficacy of antibiotic-loaded bone cement in controlling local infection and in regard to its physical characteristics, elastic modulus, and tensile strength in-vitro. methods: acrylic bone cement, based on polymethylmethacrylate (pmma) was mixed with the powder form of three antibiotics, i.e., gentamicin, tobramycin, and cefuroxime ...

The gradual evolution of the material properties of a cement-based material, i.e. the stiffness of cement paste, is the result of the continuous change of the microstructure with the progress of the hydration process. Based on an existing micromechanical model for the simulation of the shear and elastic modulus of cement paste, this paper is orientated to experimentally determine the structure ...

In this article 5-25 V% of a sol-gel bioglass fiber was incorporated into calcium phosphate bone cement to improve its mechanical properties. Compressive strength, work of fracture, elastic modulus and setting time of the cement were investigated as well as phase changes occurring during soaking the specimens in simulated body fluid (SBF). The cement microstructure was also observed by scanning...

INTRODUCTION: Cement augmentation techniques, such as vertebroplasty, are increasingly being used in the treatment of bony fractures. The rise of such procedures, along with the continued use of cement in total joint replacement, have led to increased interest in the behavior of the bone-cement interface. This region is critical in the performance of joint replacement devices and the load trans...

The use of elastomer additives to solve the problems in oil well cementing has been investigated in recent years by several research groups in the petroleum industry. This study includes the laboratory examination of the effect of elastomer additives on the physical properties of heavy-weight oil well cement. In the research process, a candidate well is selected and the properties of the cement...

The use of additives to improve the quality of cement grouts is crucial for civil engineering, especially in foundation construction. This article presents experimental data concerning the compressive strength, elastic modulus, bleeding and injectability of microfine cement grouts modified with epoxy and acrylic resin emulsions. Strength properties were obtained at different curing ages. For fu...