this paper investigates axial compression process of multi-layered tubes with circular cross-section under the axial loading in the quasi-static condition using experimental method. some specimens are prepared in seven different groups, namely; empty carbon/epoxy composite tubes, solid carbon/epoxy composite rods, empty copper tubes, composite tubes with silicon sealant filler, concentrically s...

This paper investigates axial compression process of multi-layered tubes with circular cross-section under the axial loading in the quasi-static condition using experimental method. Some specimens are prepared in seven different groups, namely; empty carbon/epoxy composite tubes, solid carbon/epoxy composite rods, empty copper tubes, composite tubes with silicon sealant filler, concentrically s...

composites provide design flexibility because many of them can be moulded into complex shapes.  carbon fibre-reinforced epoxy composites exhibit excellent fatigue tolerance with high specific strength and stiffness. these properties led to their numerous advanced applications ranging from military and civil aircraft structures to consumer products. the modelling of beams undergoing arbitrarily ...

Global energy sources such as coal and oil are limited, and the burning of such fossil resources creates pollution problems. Wind energy offers one of several promising clean alternatives to carbon-based fuels. However, the composite materials currently available for producing wind turbine blades cannot accommodate the scale-up of wind energy due to their high price and disposal challenges (e.g...

Low cost composite materials are widely used in civil and structural engineering applications. This project uses EPON to plasticize a commonly used resin, epoxy resin to lower the cost of the composite and to find out the mechanical and thermal properties of the plasticized epoxy resin to see if it is suitable for the said applications. Three point bending tests were carried out to evaluate the...

This paper presents an experimental investigation into the compression behavior of shape memory alloy hybrid composites (SMAHC) subjected to quasi-static loading taking into account of rotation effects of shape memory wire in basalt continuous filament (BCF) direct roving epoxy composite. Two types of specimen prepared, the BCF direct roving reinforced epoxy composite filled with shape memory w...

Buckling strength of composite latticed cylindrical shells is one of the important parameters for studying the failure of these structures. In this paper, new governing differential equations are derived for latticed cylindrical shells and their critical buckling axial loads. The nested structure under compressive axial buckling load was analyzed. Finite Element Method (FEM) was applied to mode...

Cross-ply laminates reinforced with basalt fibers and functionalized multi-walled carbon nanotubes (MWCNTs) were fabricated from unidirectional epoxy prepregs. MWCNTs with varied surface conditions were prepared by oxidization or esterification, and then dispersed into a DGEBA epoxy system. The dispersion of the MWCNTs in the epoxy was improved by surface modification, resulting in improved com...

Electrodes based on carbon, i.e., expanded graphite (20%, wt.)-epoxy composite(20EG-Epoxy) and expanded graphite (20%, wt.)-polystyrene composite (20EG-PS) havebeen prepared, characterized using scanning electron microscopy (SEM) and cyclicvoltammetry (CV), and tested as anodic sensors. The electrodes exhibited good mechanicalresistance and low electrical resistances. Scan rate dependent cyclic...

Composite materials can be defined as a combination of two or more materials that results in better properties than those of the individual components used alone. These materials have high strength and stiffness combined with low density compared to the conventional metals. Polymers are structurally more complex than metals. Polymer – matrix composites are viscoelastic materials and their mecha...