the flame propagation through a coal dust-air mixture in a spherical vessel was studied by means of a one-dimensional, arrhenius-type kinetics and quasi-steady model. the model includes the evaporation of the volatile matter of dust particles into a known gaseous fuel (methane) and the single-stage reaction of the gas-phase combustion. effect of venting devices as safety idea and the radiation ...

in recent years several studies have been done in the field of laminar flame speed. one of the important characteristics of the combustion is the laminar flame speed. in this study, the effects of co2 and n2 on the laminar flame speed of natural gas and gasoline fuel mixture have been investigated. schlieren method has been used in this study. experiments were carried out at pressure of 1 bar a...

nowadays, utilization of blended fuel in internal combustion engine is one of main topics in vehicle industries. the synergy effect will be highlighted when the potential of each fuel is employed and the engine performance will improve consequently.  in this research, the laminar flame speed of methane (main component of reference fuel for natural gas) and isooctane (main component of reference...

We study the dynamics and properties of a turbulent flame, formed in the presence of subsonic, high-speed, homogeneous, isotropic Kolmogorov-type turbulence in an unconfined system. Direct numerical simulations are performed with Athena-RFX, a massively parallel, fully compressible, high-order, dimensionally unsplit, reactive-flow code. A simplified reaction-diffusion model represents a stoichi...

Flame stability inside a cylindrical micro-combustor was studied. Considering occurrence of heat recirculation, the respective relations were written and with parameters such as motion speed of reactants, flame propagation speed and thermal conductivity of the combustor’s wall, flame stability and its location inside micro-combustor were studied. It was found that for each thermal conductivity ...

To reveal the inner mechanism of gas explosion dynamic behavior affected by gas equivalent concentration, a high speed Schlieren image system and flow field measurement technology was applied to record the gas explosion flame propagation and flame structure transition. The results show that a flame front structure transition occurs, followed by a flame accelerating propagation process. The lami...

The flame stability limit, which was involving the critical flow condition, lift off and blow out, could be affected by the burner geometry in the combustion system installation. Consequently a flame holder should be put in, to hold the flame as big as possible on a stable condition. The flame holder itself, is a device to hold the flame, whereas the flame holder could disturb the air and fuel ...

        In the present study, the effect of random distribution of reactants and products on laminar, 2D and steady-state flame propagation in aluminium particles has been investigated. The equations are solved only for lean mixture. The flame structure is assumed to consist of a preheat zone, a reaction zone and a post flame zone. It is presumed that in the preheat zone particles are heated an...

A dominant factor in determining the burning rate of a premixed turbulent flame is the degree to which the flame front is wrinkled by turbulence. Higher turbulent intensities lead to greater wrinkling of the flame front and an increase in the turbulent burning rate. This picture of turbulent flame dynamics must be modified, however, to accommodate the affects of variations in the local propagat...

In experiments of hot surface ignition and subsequent flame propagation, a puffing flame instability is observed in mixtures that are stagnant and premixed prior to ignition. By varying the size of the hot surface, power input, and combustion vessel volume, it was determined that the instability is a function of the interaction of the flame, with the fluid flow induced by the combustion product...