Interaction of a quasi one-dimensional soliton of the Kadomtsev-Petviashvili (KP-II) equation with a moving local dipole, described by an additional term in the equation, is investigated analytically by means of the Lagrangian-averaging (Whitham's) technique. The main result of the interaction is the generation of leftand right-going flexural waves on the crest of the soliton. The generated fle...

Experimental results for quasi-static cyclic tests on reinforced concrete (RC) walls have shown that shear deformations can constitute a significant ratio of the total deformations when the wall is loaded beyond the elastic regime. For walls, which form a stable flexural hinge at their base, the ratio of shear to flexural deformations remains approximately constant over the entire range of impo...

the combination of flexural frame and shear wall is one of the suitable systems to apply in reinforced concrete buildings. the deflections of flexural frame become limited due to the high stiffness of wall and the interaction of these systems. tall buildings even higher than fifty stories can be designed by using frame- wall systems. with respect to special behavior of flexural frame or shear w...

Reduced web section beams in shear-yielding moment-resistant steel frames are used for energy dissipating of earthquakes. The finite element analysis indicates that failure mode of these beams are governed by the combination of shear force and flexural moment. Therefore the analysis of frames with reduced web section beams needs consideration of shear-flexural interaction in those sections. In ...

OBJECTIVES The flexural strengths of veneering ceramics for zirconia were compared. METHODS With 10 different veneering ceramics for zirconia (test group) and three different veneering ceramics for the metal-ceramic technique (control group) three-point flexural strength and biaxial flexural strength according to ISO 6872: 1995 as well as four-point flexural strength according to EN 843-1: 20...

This study evaluated the effect of fiber addiction in flexural properties of 30 wt% silica filled BisGMA resin (FR) or unfilled Bis-GMA (UR). Ten groups were created (N = 10) varying the resin (FR or UR) and quantity of glass fibers (wt%: 0, 10, 15, 20, and 30). Samples (10 × 2 × 1 mm) were submitted to flexural strength test following SEM examination. Data were analyzed by two-way ANOVA, Tukey...

In the present work, Na+-montmorillonite nanoclay (Na-MMT) was functionalized using 3-aminopropyltrimethoxysilane (3-APTMS) as a coupling agent. The covalent functionalization of MMT was confirmed by Fourier-transform infrared spectroscopy (FT-IR). In the specimen fabrication stage, 5 wt% of pristine MMT or silane-functionalized MMT (f-MMT) were incorporated into an epoxy system and the resulta...

abstract statement of problem: mechanical strength and durability of dental composites are the main topics studied in this field of science today. this study examined fumed silica-based composite as a strong and durable restorative material through flexural and cycling test methods.     objectives: the purpose of this study was to evaluate the effect of silanization, ageing, cycling and hybridi...

This study compared nanofilled and microhybrid composites polymerized by different light polymerization modes, and the effects these modes had on the mechanical properties of the composites. The following mechanical properties were measured: Vickers microhardness numbers, diametral tensile strength, flexural strength, and flexural modulus. The filler content (Wt%) present in the resins was inve...