This paper presents the study of strengthening R/C beams with large circular and square opening located at flexure zone by Carbon Fiber Reinforced Polymer (CFRP) laminates. A total of five beams were tested to failure under four point loading to investigate the structural behavior including crack patterns, failure mode, ultimate load and load deflection behaviour. Test results show that large o...

OBJECTIVES The present study examines the influence of cavity type, and size of composite restorations on cuspal flexure due to polymerization shrinkage. METHODS Thirty healthy premolars were selected and divided into two experimental groups. Group 1: Mesial, mesio-distal, and MOD cavities were successively prepared in each tooth by means of the SONICSYS approx system (KaVo) using a n 2 (smal...

In this paper, flexure hinges as the main part of the actuators frame are studied considering different profiles of flexure hinges and effective design parameters to introduce the best profile of the hinge based on the application that is needed. For this purpose five different profiles (right circular, elliptical, corner-filleted, hyperbolic and parabolic) of flexure hinges have been considere...

Heterodyne hologram interferometry was used to study load-deformation characteristics of computer microcomponents that were surface mounted on a printed circuit board. The board was assembled as a cantilever plate and subjected to cyclic flexure loading according to industry standards. The flexure loading was sinusoidal at 0.1 cps with an amplitude of 1.25 mm (0.050 in.) at the tip of the board...

In this article, we propose a Flexure-FET (flexure sensitive field effect transistor) ultrasensitive biosensor that utilizes the nonlinear electromechanical coupling to overcome the fundamental sensitivity limits of classical electrical or mechanical nanoscale biosensors. The stiffness of the suspended gate of Flexure-FET changes with the capture of the target biomolecules, and the correspondin...

Mechanical foundations and pavements design need a perfect prediction of the response of the material to reach a reliable and safe structure. This work deals with the thermoelastic response of microbeams rested on a two-parameter viscoelastic foundation due to a magnetic field in the context of the dual - phase lag thermoelasticity model. The solutions of the governing equations are attained us...

Electrostatic, comb-drive actuators have been designed for applications requiring displacements of up to 150 μm in less than 1 msec. A nonlinear model of the actuator relates the resonant frequency and the maximum stable deflection to the actuator dimensions. A suite of experiments that were carried out on DRIE, single-crystal silicon, comb-drive actuators confirm the validity of the model. Fou...

Planetary topography can either be modeled as a load supported by the lithosphere, or as a dynamical effect due to lithospheric flexure caused by mantle convection. In both cases the response of the lithosphere to external forces can be calculated with the theory of thin elastic plates or shells. On one-plate planets the spherical geometry of the lithospheric shell plays an important role in th...

In scanning display systems, high horizontal and vertical resolution, and high refresh rate requirements translate into large mirror-size scan-angle product and high scanner-frequency requirements. A comparison between published scan-angle mirror-size product values for MEMS scanners and a Steel mechanical scanner is presented. Current performance levels of Steel mechanical scanners are better;...

Advancements in Sugar include 1) parameterizable netlists, 2) nonlinear frequency response analysis, 3) subnets, 4) improved MNA, 5) reduced order modeling, and 6) a more accurate nonlinear beam model. Examples of these features include the simulation of a two-axis mirror with over 10,000 degrees of freedom, the reduced order modeling applied of an electrostatic gap actuator, the parameterized ...