In reactor furnace, due to high temperature and high pressure, data can be measured only near the furnace wall. In this paper, the way to estimate temperature distribution in a reactor furnace using measured data near the furnace walls and to control temperature distribution to the desired temperature distribution was studied. In the estimation, SQP method is employed using measured data near t...

Deposits can affect the in-furnace wall surface temperature in a Kraft recovery furnace. In CFD (Computational Fluid Dynamics) models of the Kraft recovery furnace, the wall surface temperature is frequently used as the heat-transfer boundary condition. Therefore, the effect of deposits must be taken into account in CFD models. In this work, CFD simulations of a Kraft recovery furnace were perf...

In order to discuss the atomization process of an analyte element occurring in a graphite furnace for atomic absorption spectrometry, we measured variations in the characteristic temperature with the progress of an atomization stage, by using a two-line method under the assumption of a Boltzmann distribution. For this purpose, iron was chosen as the analyte element. Also, the atomic absorption ...

A mathematical heat transfer model for the prediction of transient heating of the slab in a direct-fired walking beam type reheating furnace has been developed by considering the nongray thermal radiation with given furnace environments. The furnace is modeled as radiating nongray medium with carbon dioxide and water with five-zoned gas temperature and the furnace wall is considered as a consta...

This paper deals with a novel interactive approach of Artificial Neural Network (ANN) as an optimization tool for optimizing process parameters of rotary furnace. This approach solves a very challenging problem in the area of rotary furnace i. e. selection of optimal process parameters for producing homogenous quality castings. Rotary furnace involves several critical parameters like flame temp...

Ferrochrome is the major chromium source for stainless steel production, and submerged-arc furnaces (SAF) are most commonly utilised to smelt chromite ores into ferrochrome by using suitable carbonaceous reductants such as coke. Because of the complexity of feed structure and electrical-thermal-chemical interactions, there exist large gradients and wide distributions of temperature, mineralogy ...

A novel algorithm has been developed for the nondestructive determination of the shape of the interface between a melt and a refractory material wall in smelter furnaces. This method uses measurements of temperature and heat flux at a number of points on the outer surface of the furnace, and assumes that the inner (guessed) surface of the furnace wall is isothermal. The temperature field is the...

Optimisation and improved control of the annealing furnace on a continuous galvanising line was investigated by the construction of a series of mathematical models to predict furnace and strip temperature and strip recrystallisation under both steady and transient states. A modelling approach is followed due to the very poor measurability of temperatures inside the furnace, affected by strong r...

An algorithm has been developed for the non-destructive determination of local thickness of the refractory material walls in smelter furnaces. This method uses measurements of temperature and heat flux at a number of points on the outer (fixed) surface of the furnace and assumes that the inner (guessed) surface of the furnace wall is isothermal. The temperature field is then predicted in the fu...

This paper presents a practical application of fuzzy logic to the temperature control of glass melting furnace for television picture tube. Because of the complexity and nonlinearity, temperature control of glass melting furnace is still delegated to human operators. Though the overall characteristics of glass melting furnace are complex and nonlinear, one part of the furnace characteristics ca...