gc-fid and hplc-dad were developed for determination of menadione (mn) and menadione sodium bisulphite (msb). by means of each method, quantitative analysis of msb in commercial pharmaceutical was performed in both direct analysis of msb and analysis of mn by converting msb to mn with sodium carbonate. gc-fid method was carried out on the hp-5 capillary column using nitrogen gas. hplc-dad metho...

In recent years, there has been a rapid proliferation of smokeless products with a wide range of nicotine content and flavoring formulations that may appeal to new users and existing cigarette smokers. The CDC nicotine method, which employs gas chromatography-flame ionization detection (GC-FID), provides a robust means for measuring nicotine in smokeless tobacco. However, several compounds, ide...

Gas chromatographs equipped with flame ionization detectors (GC/FID) are widely used for the quantitative analysis of hydrocarbon compounds. For precise quantitative analysis, it is essential to calibrate the GC/FID system using calibration standards for each analyte. This is both inefficient and cost−prohibitive. The response factor method is also used for calibration of the GC/FID. The respon...

was performed in both direct analysis of MSB and analysis of MN by converting MSB to MN with sodium carbonate. GC-FID method was carried out on the HP-5 capillary column GC-FID and HPLC-DAD methods were developed for determination of menadione (MN) and menadione sodium bisulphite (MSB). By means of each method, quantitative analysis of MSB in commercial pharmaceutical using nitrogen gas. HPLC-D...

Since the isolation of artemisinin 32 years ago, it has been analyzed by different chromatographic techniques. This work compared the analysis of artemisinin from crude plant samples by GC with flame ionization detection (GC-FID) and HPLC with evaporative light scattering detector (HPLC-ELSD). Data is also presented indicating that GC is suitable for the quantification of two of artemisinin pre...

the forced degradation study of lidocaine hcl was carried out according to the ich guideline q1a (r2). the degradation conditions were assessed to be hydrolysis, oxidation, photolysis and dry heat during 24 h, 48 h and 72 h and then the samples were investigated by gc-fid method and nuclear magnetic resonance (nmr) spectroscopy. according to these results, the degradation products were not obse...

BACKGROUND Urinary organic acids are water-soluble intermediates and end products of the metabolism of amino acids, carbohydrates, lipids, and a number of other metabolic processes. In the hereditary diseases known as organic acidurias, an enzyme or co-factor defect in a metabolic pathway leads to the accumulation and increased excretion of one or more of these acidic metabolites. Gas chromatog...

a very simple, rapid and sensitive dispersive liquid-liquid microextraction (dllme) followed by gas chromatography and flame ionization detection (gc-fid) was developed for the determination of phenol and carvacrol in honey samples. a mixture of 100 µl dichloromethane (extraction solvent) and 0.5 ml acetonitrile (disperser solvent) was rapidly injected into sample solution. thereby a cloudy sol...

Mineral oil (or Hydrocarbon oil) in water samples is determined by liquid-liquid extraction, followed by a clean-up step on Florisil, and GC-FID analysis. Using the Agilent 7696A Sample Prep WorkBench system, drying and clean-up of samples obtained after liquid-liquid extraction can be automated. High recoveries and excellent reproducibility are obtained for the mineral oil fraction, while the ...

acrylic base resins are widely used in orthopedics and dental surgery. it is generally accepted that due to the incomplete conversion of methyl methacrylate (mma) monomer to the polymer form during polymerization of the resin, some mma monomers remain in the hardened material. mma monomer has been reported to cause abnormalities or lesions in several organs of animals. study of the literatures ...