Corrugated web girders represent a new structural system emerged in the past two decades. The girder’s flanges provide the flexural strength of the girder with no contribution from the corrugated web which provides the girder’s shear capacity. Failure of the web occurs by steel yielding, web buckling or interactively between them. Lateral torsion and local flange buckling of corrugated web gird...

This paper is focused on using foam concrete as structural element in polymer-concrete composite plate girders. Trial mixes of foam concrete and different proportions of foam agent were considered to obtain the suitable mix that can be used as structural element in composite girders system. Details of the experimental investigations on foam concrete precast slabs and polymer-concrete composite ...

The objective of this research is to investigate the advantages of using large-diameter 0.7 inch prestressing strands in pretention applications. The advantages of large-diameter strands are mainly beneficial in the heavy construction applications. Bridges and tunnels are subjected to a higher daily traffic with an exponential increase in trucks ultimate weight, which raise the demand for highe...

We describe the studies on dynamic aperture for the Swiss Light Source (SLS) 2.4 GeV storage ring including mini gap insertion devices, magnet misalignments and magnet multipole errors. We present a novel method for calculating the Touschek relevant effective lattice momentum acceptance and lifetime. Finally we describe the design of girders optimized for static and dynamic fatigue with high pr...

The web of plate girders in bridges are usually reinforced by welded transverse stiffeners in order to improve their shear capacity.Due to problems associated with field welding and fatigue, welded stiffeners are not suitable for retrofitting existing bridges. Bolted stiffeners are a practical alternative for strengthening girders that are expected to experience shear stress in excess of their ...

................................................................................................................................... xi Acknowledgements ................................................................................................................. xii Chapter 1 General Introduction ...................................................................................................

Lattice-girder floor slabs and double-wall elements have been successfully used in building and industrial construction for decades. These precast elements of 50 – 70 mm thickness serve as permanent formwork for the subsequently added in-situ concrete creating a monolithic structure. The high prefabrication level allows the construction period to be significantly minimized. The main goal is the...

the plate girders are used in important structural systems. the earlier design of plate girders was restricted to their critical bukling capacity. experimental and theoretical studies show the plate girders with vertical stiffners can carry load over than their critical buckling loads and then in modern design codes is permitted to use post- buckling capacity of them. in this case the out- of- ...

A new analytical method to predict the torsional capacity and behavior of R.C multi-cell box girders strengthened with carbon fiber reinforced polymer (CFRP) sheets is presented. Modification was done on the Softened Truss Model (STM) in the proposed method; the concrete torsional problem is solved by combining the equilibrium conditions, compatibility conditions and constitutive laws of materi...

Two different design problems are commonly encountered by highway bridge maintenance engineers: the upgrade of existing members to handle increased load demand, or the repair of bridge members which have experienced impact events due to overheight vehicles. This paper shows that through the use of carbon fiber reinforced (CFRP) materials highway bridge girders can be effectively strengthened or...