present research involves the complete simulation of pultrusion manufacturing process of glass/polyester composites. for that purpose, the curing process is divided to two liquid and gel-solid phases. the physical characteristics of the resin consist of specific heat, viscosity and coefficient of heat transfer changes with variations of temperature and increasing the degree of curing process (α...

This investigation aims at determining the microhardness value of the hybrid direct/indirect composite resins submitted to conventional light curing and post-cured using two different methods, a light source from a laboratory light curing unit and a conventional oven heating, and the obtained results were compare to an indirect composite resin. A hybrid direct/indirect composite resin (Filtek P...

in this article the transient heat transfer in rubber parts has been studied. this study is usefull for estimation of the minimum curing time of the rubber parts and thereby to ensure the quality of the rubber. also is the temperature distribution during the rubber curing is well know, then the curing time could accurately be estimated, which will lead to a better curing process. in this regard...

statement of problem: the restoration of the teeth should have enough ability to withstand masticator forces while preserving as much tooth structure as possible. purpose: the purpose of this study was to compare the effects of light-heat cured composite with light cured composite restorations on fracture resistance of the restored teeth. materials and methods: forty healthy maxillary premolar ...

Experiments were conducted to gain a better understanding of the mechanism by which sodium chloride, sodium nitrate, and sodium nitrite supplement the action of heat in preserving canned cured meat products. Heated spores of putrefactive anaerobe 3679h were less tolerant of all three curing agents in the outgrowth medium than were unheated spores. When the curing agents were added to the heatin...

A model that describes hydration and heat-mass transport in Portland cement mortar during steam curing was developed. The hydration reactions are described by a maturity function that uses the equivalent age concept, coupled to a heat and mass balance. The thermal conductivity and specific heat of mortar with water-to-cement mass ratio of 0.30 was measured during hydration, using the Transient ...

Objectives The purpose of this experimental study was to discover a method to increase the strength of repaired polymethyl methacrylate (PMMA) samples. Materials and Methods In this experimental study, 40 specimens with the dimensions of 65×10×2.5mm3 were fabricated using heat-curing acrylic resin. Sixteen specimens were repaired with fiberglass and self-curing PMMA, while 16 samples were rep...

This study investigated the effects of layered clay on the thermal curing behavior and tensile properties of resole phenol-formaldehyde (PF) resin/clay/cellulose nanocomposites. The thermal curing behavior of the nanocomposite was characterized using conventional differential scanning calorimetry (DSC) and temperature modulated (TMDSC). The addition of clay was found to accelerate resin curing,...

one of the common methods to cure unsaturated polyester resins is to use dual initiators. in order to produce an appropriate composite, it is necessary to know the effect of dual initiators on curing behavior. in this paper the effect of benzoyl peroxide, bpo, and tertiary butyl perbenzoate, tbpb, and their mixtures on thermal curing of an unsaturated polyester resin have been investigated. bpo...

Adhesive strength between microsized SU-8 components and Si substrate is evaluated to clarify effects of heat curing. Micro-sized cylindrical shape is employed as a micro-sized adhesive test specimen to properly apply the load onto the specimen and to simply convert applied load to stress. Micro-sized cylindrical specimens of epoxy type photoresist, SU8, were fabricated on a silicon wafer using...