نتایج جستجو برای: Heat Resistant Steel
تعداد نتایج: 466220 فیلتر نتایج به سال:
In this research, the dissimilar welding of St52 plain carbon steel to W400 wear resistant steel and its effect on the microstructure and wear properties of the wear resistant steel was investigated. The wear resistant steel was produced via direct quenching with nominal hardness of 400 HB. Gas tungsten arc welding was used for joining process. The results showed that welding led to hardness re...
In this research, the dissimilar welding of St52 plain carbon steel to W400 wear resistant steel and its effect on the microstructure and wear properties of the wear resistant steel was investigated. The wear resistant steel was produced via direct quenching with nominal hardness of 400 HB. Gas tungsten arc welding was used for joining process. The results showed that welding led to hardness re...
run-out-table (rot) is located between last finishing stand and down coiler in a hot strip mill. as the hot steel strip passes from rot, water jets impact on it from top and bottom and strip temperature decreases approximately from 800-950 °c to 500-750°c. the temperature history that strip experience while passing through rot affects significantly the metallurgical and mechanical properties, s...
grate bar is an industrial part which is used in the indurating furnace of an iron ore pelletizing plant. steel part ofthe grate bars are expected to have high resistance to atmospheric oxidation because of its contact with hot gases(up to 920 °c) during the normal operation of the process. in this study, different samples from several sections ofused grate bars with apparent defects were selec...
The heat-resistant steel after aluminized was treated by laser shock processing (LSP) with high power Nd:YAG laser, and then was tensile tested at 400 . The effects of the high °C -temperature behavior after LSP were analyzed from residual stress and fracture organization. The results showed that the yield strength and tensile strength of heat-resistant steel after aluminized were improved obvi...
in this study, the changes in microstructure of hp-nb cast heat resistant steel after 8 years of service at high temperatures were investigated. study of microstructure using optical microscopy (om) and scanning electron microscopy (sem) equipped with an energy dispersive spectrometry (eds) showed that the microstructure of this steel in as-cast condition includes an austenitic matrix, and that...
S. Krum, F. Pešlová, Czech Technical University in Prague, Faculty of Mechanical Engineering Prague, Czech Republic, J. Kliber VŠB TU Ostrava, Czech Republic Corrosion resistant steels are used for the prod uction of parts exposed to corrosive environment and also to thermo-mechanical loads. Steel molds in the glass manufacture industry with their functional surfaces simultaneously exposed to t...
The causes and the prevention of carbon steel corrosion in amine systems are reviewed. The corrosive agents are acid gases, oxygen, heat stable salts, amine degradation products, and, in refineries, gas contaminants such as ammonia and hydrogen cyanide. Corrosion mechanisms are provided for carbon steel exposed to amine solutions and for amine regenerator overhead systems containing aqueous con...
We report a computational 'alloy by design' approach which can significantly accelerate the design process and substantially reduce the development costs. This approach allows simultaneously optimization of alloy composition and heat treatment parameters based on the integration of thermodynamic, thermo-kinetics and a genetic algorithm optimization route. Novel steel compositions and associated...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید