This paper presents an element of a 2×2-element array antenna for Inmarsat BGAN/GPS applications. The element is an axial mode printed quadrifilar helical antenna that has been integrated with a compact feed network to provide sequential phase rotation for circular polarization (CP) radiation. The novel integrated lumped-element feed network is designed to provide a balanced RF power to the fou...

Analysis and design techniques for designing a lumped-element 3-dB quadrature coupler with wide-band flat coupling are proposed for microwave integrated-circuit/monolithic-microwave integrated-circuit applications. The proposed design technique can produce a coupler with flat coupling over 50% fractional bandwidth, which is wider than the conventional lumped-element design methods. A prototype ...

Lumped element models for the frequency dependence of substrate parasitics in integrated circuits are evaluated. The frequency ranges for which these models are applicable have been identified. Two new models that are suitable for very high frequencies are also presented.

The representation of electromagnetic structures by lumped element circuits is revisited. Network models can be established by a subsequent application of system identification and circuit synthesis methods to data obtained by numerical simulation or from measurement. Network models provide a compact description of electromagnetic structures and can contribute significantly to the formulation o...

The design and experimental results of a 5-, 10and 23-pole lumped-element HTS bandpass filters for the applications in digital terrestrial television and other digital communication services is reported here. These filters are designed around 800 MHz centre frequency, 7.6 MHz bandwidth using end-coupled lumped element resonators on yttrium-barium-copper-oxide (YBCO) or thallium-barium-calcium-c...

A lumped-element circuit is proposed to model a coplanar waveguide (CPW) interdigital capacitor (IDC). Closed-form expressions suitable for CAD purposes are given for each element in the circuit. The obtained results for the series capacitance are in good agreement with those available in the literature. In addition, the scattering parameters obtained from the circuit model are compared with th...

This paper analyzes voting on a linear income tax which is redistributed lump sum to the taxpayers. Individuals can evade taxes, which leads to penalties if evasion is detected. Since preferences satisfy neither single peakedness nor single crossing, an equilibrium may not exist. When it does exist, it may have interesting properties, in particular, the poor and the rich may form a coalition ag...

This paper shows that stricter enforcement may increase tax evasion. Individuals vote on a linear income tax which is used to finance lump sum transfers. Stricter enforcement may make redistributive taxation more attractive to the decisive voter. The tax rate and transfer may rise which in turn may increase tax evasion. An example shows that this result can actually occur. The paper also discus...

This paper presents a monolithically integrated broadband lumped-element Wilkinson power divider centered at 20 GHz, which was designed and fabricated to uniformly distribute power to arrays of Josephson junctions (JJs) for superconducting voltage standards. This solution achieves a fourfold decrease in chip area, and a twofold increase in bandwidth (BW) when compared to the previous narrowband...

This work describes a method to derive from measurements an accurate lumped element model of spiral integrated inductors on silicon substrate. The analysis method is based on a wideband two–port measurement of the S-parameters of the device under test and enables an accurate evaluation of the parasitic effects that limit the performance of these integrated devices.