the surface properties of tio2-pvdf nanocomposite membranes were investigated by incorporating different chemically modified tio2 nanoparticles into the poly (vinylidene fluoride) (pvdf) matrix. the nanocomposite membranes were prepared via dual coagulation bath diffusion and the induced phase inversion method. the membrane surface morphologies were investigated by using sem and afm and related...

carbon membrane can be produced using a wide variety of polymer precursor materials via heat treatment process. a general concept route of precursor selection-preparation-modification-performance analysis platform for the carbon membrane has been proposed to promote the development of carbon membrane material for a wide range of application. the current review considers the recent progress of c...

Electrospinning is a simple and versatile technique that relies on the electrostatic repulsion between surface charges to continuously draw nanofibers from a viscoelastic fluid. Electrospinning can generate nanofibers with a number of secondary structures. Surface and/or interior of nanofibers can be functionalized with molecular species or nanoparticles during or after an electrospinning proce...

the effects of operating parameters such as feed temperature and permeate-side pressure on the performance of a commercial pva membrane in the dehydration of toluene by a pervaporation (pv) membrane system is studied in the present work. the results obtained indicate that increasing temperature in the range of 40 to 70 °c and reducing permeate pressure in the range of 1 to 10 mmhg increase memb...

A novel work was performed for fabrication and modification of composite nanofiltration (NF) membrane by polymerization reaction between polyethyleneimine (PEI) and triphthaloyldechloride (TPC). the main purpose of this work was water treatment. polysulfone was applied as a main polymer of substrate. The result of reaction between PEI and TPC would be formation of polyamide layer on the membran...

The effects of operating parameters such as feed temperature and permeate-side pressure on the performance of a commercial PVA membrane in the dehydration of toluene by a pervaporation (PV) membrane system is studied in the present work. The results obtained indicate that increasing temperature in the range of 40 to 70 °C and reducing permeate pressure in the range of 1 to 10 mmHg increase memb...

the suitability of three vapor deposition techniques for pore size modification was evaluated using polycarbonate track etched membranes as model supports. a feature scale model was employed to predict the pore geometry after modification and the resulting pure water flux. physical vapor deposition (pvd) and pulsed plasma-enhanced chemical vapor deposition (pecvd), naturally, form asymmetric na...

Carbon membrane can be produced using a wide variety of polymer precursor materials via heat treatment process. A general concept route of precursor selection-preparation-modification-performance analysis platform for the carbon membrane has been proposed to promote the development of carbon membrane material for a wide range of application. The current review considers the recent progress of c...

In this project, eggshell membrane was used as a solid phase extraction sorbent for extraction of morphine followed by HPLC analysis. At first, raw eggshell membrane was used and then, because of low adsorption of morphine on untreated eggshell membrane (<70%), modification of eggshell membrane surface was carried out using different surfactants and amines. The amine modified eggshells characte...

This investigation indicates the ability to selectively graft glycidyl methacrylate (GMA) only from the external surface of regenerated cellulose (RC) ultrafiltration (UF) membranes using activator generated electron transfer (AGET) atom transfer radical polymerization (ATRP). This controlled polymerization resulted in epoxy functionalized polymer brush ends. Further reaction of the terminal ep...