Metal-matrix composites (MMCs) are used in a large number of high-performance applications. In 2004, more than 3.5 million kg of MMCs were used and the number is increasing rapidly, with an annual growth rate exceeding 6%. Most of the current MMC applications are in ground transportation, aviation, electronics, and sports industries. The initial discovery of the synthesis of cast aluminum-matri...

in this study, ultrafine grained 2024 al alloy based b4c particles reinforced composite was produced by mechanical milling and hot extrusion. mechanical milling was used to synthesize the nanostructured al2024 in attrition mill under argon atmosphere up to 50h. a similar process was used to produce al2024-5%wt. b4c composite powder. to produce trimodal composites, milled powders were combined w...

applications of thermoplastic composites have developed extensively. the thermoplastic composites in comparison with the thermoset composites have many advantages. thermoplastic composites can be melted and remolded many times. the duration of manufacturing process of these composites is short, producing very tough material, and the welding ability and multiple recyclings are their further adva...

the creep behavior of basalt fiber reinforced epoxy (bfre) and glass fiber reinforced epoxy (gfre) composites was studied through tensile testing at high temperature. to study the effect of reinforcing epoxy, the micro glass powder (mgp) was added at various volume percentage into the epoxy resin in bfre composites. the initial strain for all the specimens were evaluated and compared with each ...

this paper deals with the investigation of the microstructure and hardness of steel samples cladded with satellite 6-wc composites by using gas tungsten arc welding (gtaw) process. for this purpose, steel samples were coated with unreinforced and reinforced stellite (by 20, 30 and 40 wt.% wc). the cladded samples were evaluated by metallographic studies, microhardness measurement and x-ray diff...

in this research, the influence of adding micro- and nano- sized calcium carbonate powders to nylon-66 was investigated. mechanical properties of micro and nano- composites, including tensile strength, elongation, and young’s modulus, before and after ageing, were determined and analyzed. for this purpose, micro- and nano-sized caco3 particles were used as fillers to prepare micro-composites (c...

a new model is proposed in this research to calculate the longitudinal strengthof unidirectional e-glass reinforced polymer composites exposed to sulfuricacid environment, using a micromechanics model. in the proposed method,it is assumed that the residual strength of the degraded composites under acidic environment can be calculated by knowing the degraded strength properties of the constituen...

hydroxyapatite is a biocompatible ceramic and reinforcement for bone implantations. seva/hap composite content hap filler with difference particle sizes were designed. mechanical tests like tensile modulus, uts, strain at break and biodegradation were investigated. results illustrated much increase tensile modulus of composites content hap nano powders ratio to micro powders. also uts analysis ...