Abstract. In this paper, a Cascaded Lattice Boltzmann Method with second order slip boundary conditions is developed to study gas flows in a microchannel in the slip and transition flow regimes with a wide range of Knudsen numbers. For the first time the effect of wall confinement is considered on the effective mean free path of the gas molecules using a function with nonconstant Bosanquet para...

The present study experimentally investigated a new hybrid cooling scheme by combination of a microchannel heat sink with a micro-synthetic jet actuator. The heat sink consisted of a single rectangular microchannel measured 550 μm wide, 500 μm deep and 26 mm long. The synthetic jet actuator with a 100 μm diameter orifice was placed right above the microchannel and 5 mm downstream from the chann...

In this work, single layered (SL) and double layered (DL) flexible microchannel heat sinks are analyzed. The deformation of the supporting seals is related to the average internal pressure by theory of elasticity. It is found that sufficient cooling can be achieved using SL flexible microchannel heat sinks at lower pressure drop values for softer seals. Double layered flexible microchannel heat...

the fluid flow and heat transfer in a three-dimensional microchannel filled with al2o3- water nanofluid is numerically investigated. the hybrid scheme is used to discretize the convection terms and simpler algorithm is adopted to couple the velocity and pressure field in the momentum equations. the thermal and flow fields were analyzed using different volume fractions of nanoparticles and diffe...

We propose and demonstrate a new fabrication process of a microchannel using the Damascene process. This process aims to integrate photonic circuits with microchannels fabricated in a glass film. The microchannel is fabricated by the removal of the sacrificial layer after a sacrificial layer is formed by the Damascene process and the cover is formed by sputter deposition. A thin cover layer can...

In this study, extraction of tannic acid using microchannel was investigated. Affective parameters were optimized. Different solvents including buthanol, ethylacetate and n-hexane as organic phase, methanol, propanol, ethanol and water as aqueous phase investigated. Microchannels with different confluence angles and diameters were examined. Microchannels with different confluence angles and dia...

The paper describes the fabrication and chemical applications of polymer microchannel chips, with special reference to in situ observations of the chemical/physical processes occurring in polystyrene microchannel chips, including those in microchannel-microelectrode/microheater chips. On the basis of absorption/fluorescence microspectroscopy and microelectrochemistry techniques, we show some ch...

We used inclined lithography to fabricate a pneumatic microvalve for tall microchannels such as those used to convey large cells. The pneumatic microvalve consists of three layers. The upper layer is the actual liquid microchannel, which has a parallelogram-shaped cross section of width 500 μm, height 100 μm, and an acute angle of 53.6◦. The lower layer is a pneumatic microchannel that function...

the fluid flow and heat transfer in a three-dimensional microchannel filled with al2o3- water nanofluid is numerically investigated. the hybrid scheme is used to discretize the convection terms and simpler algorithm is adopted to couple the velocity and pressure field in the momentum equations. the temperature fields, variation of horizontal velocity along the centre line of the channel, averag...

In this paper, we report spatial distribution of laminar flow-assisted dendritic amplification (LFDA) product. LFDA is a recently invented signal amplification method dedicated to biomolecular binding events on microchannel walls. Onto the bound biomolecule, a dendritic structure is constructed by supplying two building blocks from laminar streams produced by a Y-shaped microchannel. In view of...