Abstract: Electroless Nickel (EN) composite coatings embedded with Cr2O3 and/or MoS2 particles were deposited to combine the characters of both Cr2O3 and MoS2 into one coating in this study. The effects of the co-deposited particles on corrosion behavior of the coating in 3.5% NaCl media were investigated. The results showed that both Ni-P and Ni-P composite coatings had significant improvement...

in this work the effects of various methods of agitation on the properties of electroless ni-p-mos2 composite coatings were investigated. magnetic stirring as well as purging the solution with gas (air, oxygen, nitrogen) were used. plating rate, chemical composition, mos2 distribution, and hardness of the deposit were measured. topography of coating was studied with metallography and scanning e...

Closed caged fullerene-like molybdenum disulfide (MoS2) nano-particles were obtained via an arc discharge between a graphite cathode and a molybdenum anode filled with microscopic MoS2 powder submerged in de-ionized water. A statistical study of over 150 polyhedral fullerene-like MoS2 nano-particles in plan view transmission electron microscopy revealed that the majority consisted of 2–3 layers...

Tribological behavior of Cu-MoS2 and Ag-MoS2 nanocomposite lubricant was studied. Cu nanoparticles produced by electrical explosion of copper wires and Ag nanoparticles prepared by electrospark erosion were employed as metal cladding modifiers of MoS2 nanolamellar particles. The tribological tests showed Cu-MoS2 and Ag-MoS2 nanocomposite lubricants changed the friction coefficient of the initia...

In this work the effects of various methods of agitation on the properties of electroless Ni-P-MoS2 composite coatings were investigated. Magnetic stirring as well as purging the solution with gas (Air, Oxygen, Nitrogen) were used. Plating rate, chemical composition, MoS2 distribution, and hardness of the deposit were measured. Topography of coating was studied with metallography and scanning e...

Coupling ultrasmall Fe2O3 particles (~4.0 nm) with the MoS2 nanosheets is achieved by a facile method for high-performance anode material for Li-ion battery. MoS2 nanosheets in the composite can serve as scaffolds, efficiently buffering the large volume change of Fe2O3 during charge/discharge process, whereas the ultrasmall Fe2O3 nanoparticles mainly provide the specific capacity. Due to bigger...

In this work the effects of various methods of agitation on the properties of electroless Ni-P-MoS2 composite coatings were investigated. Magnetic stirring as well as purging the solution with gas (Air, Oxygen, Nitrogen) were used. Plating rate, chemical composition, MoS2 distribution, and hardness of the deposit were measured. Topography of coating was studied with metallography and scanning e...

We report the optimized synthesis and electrochemical characterization of a composite of few-layered nanostructured MoS2 along with an electroactive metal oxide BiVO4. In comparison to pristine BiVO4, and a composite of graphene/BiVO4, the MoS2/BiVO4 nanocomposite provides impressive values of charge storage with longer discharge times and improved cycling stability. Specific capacitance values...

Sulfur is an attractive cathode material for next-generation lithium batteries due to its high theoretical capacity and low cost. However, dissolution of its lithiated product (lithium polysulfides) into the electrolyte limits the practical application of lithium sulfur batteries. Here we demonstrate that sulfur particles can be hermetically encapsulated by leveraging on the unique properties o...

The use of UHMWPE has attracted the attention of many researchers and industries. The aim of the present work is to fabricate UHMWPE/MoS2-Oxide nano-composites using in-situ polymerization. For this purpose, modified molybdenum disulfide was used. In order to perform the polymerization, a Ziegler-Natta catalytic system, with MoS2-Oxide and magnesium Ethoxide as support, was used. In order to fa...