Severe foundation scour may occur around monopile foundations of offshore wind turbines due to currents and waves. The so-called p-y curves method is suggested in the existing design recommendations to determine the behavior of monopiles unprotected against scour and the reduction of effective soil stress is accounted for by the extreme scour depth. This conservative design approach does not co...

Breaking wave impacts on a monopile at 20 m depth are computed with a VOF (Volume Of Fluid) method. The impacting waves are generated by the second-order focused wave group technique, to obtain waves that break at the position of the monopile. The subsequent impact from the vertical run-up flow on a horizontal inspection platform is computed for five different platform levels. The computational...

Uncertainties related to fatigue damage estimation of non-linear systems are highly dependent on the tail behaviour and extreme values of the stress range distribution. By using a combination of the First Order Reliability Method (FORM) and Monte Carlo simulations (MCS), the accuracy of the fatigue estimations may be improved for the same computational efforts. The method is applied to a bottom...

Steel monopiles, jackets requiring four steel pinpiles, and gravity-based foundations were applied in offshore wind farms in the Belgian part of the North Sea. This paper compares the underwater noise generated during the piling activities of steel monopiles at the Belwind wind farm (Blighbank) with that of jacket pinpiles at the C-Power project (Thorntonbank). Underwater noise was measured at ...

The offshore wind industry currently relies on subsidy schemes to be competitive with fossil-fuel-based energy sources. For the wind industry to survive, it is vital that costs are significantly reduced for future projects. This can be partly achieved by introducing new technologies and partly through optimization of existing technologies and design methods. One of the areas where costs can be ...

An overview of offshore wind turbine (OWT) foundations is presented, focusing primarily on the monopile foundation. The uncertainty in offshore soil conditions as well as random wind and wave loading is currently treated with a deterministic design procedure, though some standards allow engineers to use a probability-based approach. Laterally loaded monopile foundations are typically designed u...

Offshore wind turbines (OWTs) are dynamically loaded structures and therefore the estimation of the natural frequency is an important design calculation to avoid resonance and resonance related effects (such as fatigue). Monopiles are currently the most used foundation type and are also being considered in deeper waters (430 m) where a stiff transition piece will join the monopile and the taper...

In evaluating ultimate limit states for design, time-domain aeroelastic response simulations are typically carried out to establish extreme loads on offshore wind turbines. Accurate load prediction depends on proper modeling of the wind turbulence and the wave stochastic processes as well as of the turbine, the support structure, and the foundation. One method for modeling the support structure...

We probe the reliability of monopile support structures designed to support industrial scale turbines along the coastal United States using stochastic models for the wind and wave loadings, and representations of the uncertainty associated with soil properties. The turbine support structure investigated is that promulgated by the National Renewable Energy Laboratory as typical of a monopile sup...