During the flood development in an oil field, the creep characteristic of mudstone is one of the important factors causing casing damage. In this study, based on the theory of fractional order differential and taking into account the creep damage evolution rules, a fractional nonlinear creep-damage model is proposed to reflect the instantaneous deformation in loading processes and the accelerat...

Most salt rock has interbed of mudstone in China. Owing to the enormous difference of mechanical properties between the mudstone interbed and salt rock, the stress-strain and creep behaviors of salt rock are significantly influenced by neighboring mudstone interbed. In order to identify the rules of wellbore shrinkage and casings equivalent stress in bedded salt rock stratum, three-dimensional ...

The creep behavior of nanocellulose films and aerogels are studied in a dynamic moisture environment, which is crucial to their performance in packaging applications. For these materials, the creep rate under cyclic humidity conditions exceeds any constant humidity creep rate within the cycling range, a phenomenon known as mechanosorptive creep. By varying the sample thickness and relative humi...

Knowledge about the permeability of surrounding rock (salt rock and mudstone interlayer) is an important topic, which acts as a key parameter to characterize the tightness of gas storage. The goal of experiments that test the permeability of gas storage facilities in rock salt is to develop a synthetic analogue to use as a permeability model. To address the permeability of a mudstone/salt layer...

Abstract Based on the fact that production of deep coalbed methane (CBM) in Yushe-Wuxiang Block is lower than expected, paper carried out uniaxial strength test and triaxial rheological coal measure strata reservoirs (mudstone, coal, sandstone their composite sample) deeper 1300 m block. In test, it found stress–strain process rock sample was similar to shallow one. The brittleness more obvious...

For many of the Pb-free solders required under the European RoHS directive, there is now sufficient information, primarily in the form of the results of accelerated thermal cycling of various levels of severity, to develop acceleration models for the creep-fatigue of these solders. In this paper the parameters for the SAC405/305, SAC205, SAC105 and SnAg to replace the parameters for eutectic Sn...

The creep behaviors of TA2 and R60702 at low and intermediate temperature were presented and discussed in this paper. Experimental results indicated that an apparent threshold stress exhibited in the creep deformation of R60702. Meanwhile, the primary creep phase was found as the main pattern in the room temperature creep behavior of TA2. Compared with exponential law, the power law has been pr...