نتایج جستجو برای: Ni-SiC-Gr
تعداد نتایج: 79019 فیلتر نتایج به سال:
Ni–SiC composite coatings are successfully employed as a protective coating in the inner walls of engine cylinders. In this study, Ni-SiC, Ni-SiC-MoS2 and Ni-SiC-Gr composite coatings were prepared from a sulfamate bath. Both mechanical and ultrasonic stirring were used simultaneously during the process. Taking into account the working temperature of engine cylinders, the wear behavior of...
پوشش کامپوزیتی ni-sic، یکی از پوشش هایی است که برای فراهم نمودن مقاومت سایشی مناسب، در بسیاری از کاربردها نظیر سیلندرها، موتورهای احتراق و قالب های ریخته گری مورد استفاده قرار می گیرد. در این پژوهش، سه پوشش ni-sic، ni-sic-mos2 و ni-sic-gr با استفاده هم زمان از دو هم زن مکانیکی و فراصوت در حمام سولفامات نیکل ایجاد شد. با توجه به دمای کاری موتور، آزمون سایش در محدوده دمایی 300-25 درجه سانتی گراد ...
Graphene (Gr) is currently the object of intense research investigations, owing to its rich physics and wide potential for applications. In particular, epitaxial Gr on silicon carbide (SiC) holds great promise for the development of new device concepts based on the vertical current transport at Gr/SiC heterointerface. Precise tailoring of Gr workfunction (WF) represents a key requirement for th...
This Investigation studies the Mechanical and Tribological behaviour [ i.e dry sliding behaviour] of Al matrix composites reinforced with SiC and Gr particulate up to 10%, to study the effect of reinforcement, Load, Sliding speed and Sliding distance on stir cast Al-SiC and Al-Gr Metal matrix composites. Parametric studies indicate that the hardness, tensile strength of Al-SiC composite is grea...
In this study, electrochemical deposition of Ni-SiC-Gr nano composites was studied. The Watts bath was used for electrodeposition. The SiC and graphite powders were suspended in the electrolyte and stirred. The effects of changes in bath stirring rate on the composite coating were investigated. The X-Ray diffraction (XRD), scanning electron microscopy (SEM) and field emission scanning electron ...
This paper focused on evaluation of machining parameters influencing thrust force during drilling of Al–SiC–Gr metal matrix composites using multifaceted carbide drills. There are three machining parameters i.e. Spindle speed, Feed rate, Drill diameter. Experiments are conducted on a vertical machining centre using Taguchi design of experiments. Taguchi orthogonal array is designed with three l...
پوشش های آلیاژی ni-co در دو حمام اصلاح شده واتس، یکی حاوی ساخارین و دیگری حاوی نانو ذرات sic با قطر متوسط nm 20، به روش لایه نشانی الکتروشیمایی با استفاده از الکترودهای افقی تولید شدند. مورفولوژی سطحی، ترکیب شیمیایی، ساختار فازی، سختی و مقاومت به خوردگی پوشش ها با استفاده از میکروسکپ الکترونی روبشیsem، آنالیزگر edx، تفرق سنجی اشعه ایکس xrd، ریزسختی سنجی و آزمونهای پلاریزاسیون مورد مطالعه قرار گ...
Low-temperature (~1073 K) formation of graphene was performed on Si substrates by using an ultrathin (2 nm) Ni layer deposited on a 3C-SiC thin film heteroepitaxially grown on a Si substrate. Angle-resolved, synchrotron-radiation X-ray photoemission spectroscopy (SR-XPS) results show that the stacking order is, from the surface to the bulk, Ni carbides(Ni3C/NiCx)/graphene/Ni/Ni silicides (Ni2Si...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید