accurate identification of seismic hazard and the estimation of associated seismic demands are the key components in the performance-based seismic design (pbsd). although nonlinear time history (nth) analysis is the most precise procedure to evaluate the seismic demands of buildings structures, it is relatively complex and time-consuming for routine applications. nonlinear static procedures (ns...

the nonlinear static pushover analysis technique is mostly used in the performance-based design of structures and it is favored over nonlinear response history analysis. however, the pushover analysis with fema load distributions losses its accuracy in estimating seismic responses of long period structures when higher mode effects are important. some procedures have been offered to consider thi...

Irregular buildings make up a large portion of  urban infrastructure. Presence of irregularities can be due to architectural and  user changes in building stories. Main objective of this article is evaluate seismic performance of structures with vertical irregularities. Seismic responses are obtained by enveloping peak inelastic responses resulting from pushover analyses according to provided p...

response modification factor (r factor) is one of the seismic design parameters to be considered in evaluating the performance of buildings during strong motions. this paper has tried to evaluate the response modification factor of concrete coupled shear wall structures with various length/depth ratios of spandrel beams. the effect of diagonal reinforcement of spandrel beam was also evaluated o...

Recent investigations have shown that the influences of Soil-Structure Interaction (SSI) may be detrimental to the seismic response of structure, and hence neglecting this phenomenon in analysis and design may lead to an un-conservative design. The objective of this paper is to quantify the effects of nonlinear soil-structure interaction on the seismic response of a low-rise special moment fram...

The base isolation systems are among the passive control devices that have been used over the last three decades to limit the seismic-induced response of structures. In this regard, the Uniform Building Code provisions (UBC) has incorporated a special section for the seismic design of base isolated structures since its 1991 edition. Due to the importance of the behavior of these structures unde...

The base isolation systems are among the passive control devices that have been used over the last three decades to limit the seismic-induced response of structures. In this regard, the Uniform Building Code provisions (UBC) has incorporated a special section for the seismic design of base isolated structures since its 1991 edition. Due to the importance of the behavior of these structures unde...

the proposal lateral load pattern for pushover analysis is given in two forms for symmetric concrete buildings: 1-(x/h)0.5 for low-rise and mid-rise buildings, 2- sin(πx/h) for high-rise buildings. these two forms give more realistic results as compared to conventional load patterns such as triangular and uniform load patterns. the assumed buildings of 4, 8, 12, 16, 20 and 30 story concrete bui...

Response modification factor (R factor) is one of the seismic design parameters to be considered in evaluating the performance of buildings during strong motions. This paper has tried to evaluate the response modification factor of concrete coupled shear wall structures with various length/depth ratios of spandrel beams. The effect of diagonal reinforcement of spandrel beam was also evaluated o...

the base isolation systems are among the passive control devices that have been used over the last three decades to limit the seismic-induced response of structures. in this regard, the uniform building code provisions (ubc) has incorporated a special section for the seismic design of base isolated structures since its 1991 edition. due to the importance of the behavior of these structures unde...