Many copper water lines for municipal drinking water in Santa Fe, New Mexico USA, have developed pinhole leaks. The pitting matches the description of Type I pitting of copper, which has historically been attributed to water chemistry and to contaminants on the copper tubing surface. However, more recent studies attribute copper pitting to microbial induced corrosion (MIC). In order to test for...

The electrochemical studies of pitting corrosion of CuFe alloy (70% Cu30%Fe) were carried out in sodium chloride solutions. The techniques of measurements were: open circuit potential, potentiodynamic polarization and electrochemical impedance spectroscopy. The effect of different concentrations of the inorganic additives (WO4 , PO4 , NO2 , B4O7 , CrO4 ) on the pitting corrosion of the alloy in...

The electrochemical and corrosion behaviour of Al-6061, Al-4.5%Cu and Al-7.5%Cu alloys were studied in 0.50 M KSCN solution at 25 C. Open-circuit potential, Tafel polarization and ICP-AES measurements were used to study the uniform corrosion process on the surfaces of the tested alloys. Cyclic polarization measurements were employed for pitting corrosion studies. Obtained results were compared ...

aisi 304l austenitic stainless steel with different grain sizes of 0.5 -12 μm was obtained through the martensiticprocess. corrosion behavior of different samples was investigated in a 0.5m hcl solution using open circuitpotential, potentiodynamic polarization and electrochemical impedance spectroscopy tests. also, the correlationbetween the grain size and pitting corrosion resistance was asses...

Hydrostatic pressure effects on pitting initiation and propagation in X70 steel are investigated by evaluating metastable pitting probability using electrochemical methods and immersion corrosion tests in containing chlorine ion solution. Potentiodynamic tests indicated that hydrostatic pressure can decrease the breakdown potential and lead to a reduced transpassivity region. Metastable test re...

In this study, the pitting behaviour of a new corrosion-resistant alloy steel (CR) is compared to that of low-carbon steel (LC) in a simulated concrete pore solution with a chloride concentration of 5 mol/L. The electrochemical behaviour of the bars was characterised using linear polarisation resistance (LPR) and electrochemical impedance spectroscopy (EIS). The pitting profiles were detected b...

Pitting corrosion is localized accelerated dissolution of metal that occurs as a result of a breakdown of the otherwise protective passive film on the metal surface. This paper provides an overview of the critical factors influencing the pitting corrosion of metals. The phenomenology of pitting corrosion is discussed, including the effects of alloy composition, environment, potential, and tempe...

BACKGROUND Remitting seronegative symmetrical synovitis with pitting edema syndrome is characterized by symmetrical synovitis with pitting edema in the dorsum of the hands or feet. Most cases of remitting seronegative symmetrical synovitis with pitting edema syndrome are idiopathic, but some are secondary to malignancy, autoimmune disease, or neurodegenerative disorders. Pleural and pericardial...

Remitting Seronegative Symmetrical Synovitis with Pitting oedema syndrome, a rare inflammatory arthritis, commonly affects people in the older age group. It can present as an acute onset polyarthritis with associated pitting oedema of the extremities. Patients show excellent response to low dose steroids with complete and sustained remissions. It can also be a paraneoplastic manifestation of an...

There were severe pitting corrosions on the surface of transmission gears in diesels. The cause of metal fatigue pitting of gear surface is analyzed in the paper, which based on the contact fatigue experiment of 18Cr2Ni4WA carburizing and quenching gears used in the diesel engine. Causes of pitting on harden tooth surface are studied from three aspects: gear surface residual stress field, oil f...