Making use of concrete materials in cut-off walls, because of their low permeability and standing high Hydraulic Gradient caused by underground drainage, has attracted great amount of attention. Using ordinary concrete with high elasticity modulus, compared to other materials may accompany with problems including brittleness of cutoffs due to dynamic stresses. To solve this problem, adding a ce...

having observed the costly failures of different cutoff walls, that had been constructed according to the mix design specified by reputable consultants in iran, a research programme was conducted to study the effects of constituent materials on the properties of plastic concrete. the main properties, such as compressive strength, biaxial and triaxial strains, permeability, and modulus of elasti...

There have been great developments in the area of civil engineering in the recent few decades and among these, construction and material innovation are quite prominent. Steel-concrete composite construction has emerged as one of the fastest methods of construction. Even though considerable research efforts on conventional reinforced concrete columns have been executed prior to now, concrete fil...

Plastic concrete consists of aggregates, cement, water and bentonite, mixed at a high water cement ratio, to produce a ductile material. It is used for creating an impermeable barrier (cut-off wall) for containment of contaminated sites or seepage control in highly permeable dam foundations. The effects of water to binder ratio and clay dosage on mechanical properties of plastic concrete were i...

in the construction process of a plastic concrete cut-off wall, concreting is usually performed using the termie pipe method. in this method, concreting is performed from the lowest point in the excavated trench (containing the slurry) using a funnel and the pipe connected to it. the concrete poured in the funnel gradually settles in the panel through the termie pipe which is beneath the slurry...

The Disposal of large quantity of plastic cover may cause pollution of land, water bodies and air. The proposed concrete which is made up by adding plastic in concrete may help to reuse the plastic cover as one of the constituents material of concrete, to improve the certain properties of concrete. The properties of concrete as varying percentages of plastic will test for compressive strength a...

This paper presents a modified form of the Walker-Anderson (W-A) model for analyzing high velocity penetration of an eroding projectile into a concrete target in which the W-A model is improved by incorporating calculations for the plastic flow field of concrete in terms of its compressibility and strain rate sensitivity under severe pressure. With the changes to and calculations of plastic fie...

P. Priyadharshini, G. Mohan Ganesh, A.S. Santhi Abstract— The reduction in moisture of fresh concrete results in plastic shrinkage due to tensile stress induced by capillary pressure. When the tensile strength signs beyond the capacity of concrete, it cracks and this effect in early stage of concrete is termed as plastic shrinkage of concrete. This becomes a serious issue for large surface area...

To assess the performance criteria of the reinforced-concrete, five-storey residential buildings common in Iran, an experimental study in the structural laboratory of the University of Tehran has been conducted. The test program includes cyclic and monotonic load tests of six beams that represent three-to-five storey buildings with rigid frame structures. Using definitions given in FEMA-356 a...